532618
71
Zoom out
Zoom in
Vorherige Seite
1/186
Nächste Seite
[PICTURE] menu
ENGLISH - 71
Settings
[NOISE REDUCTION]
You can reduce noises when the input image is
degraded and noise is occurring in the image signal.
1) Press

to select [NOISE
REDUCTION].
2) Press
󱚣󱚤
or the <ENTER> button.
z
The [NOISE REDUCTION] individual
adjustment screen is displayed.
3) Press
󱚣󱚤
to switch the [NOISE
REDUCTION].
z
The setting will change as follows each time
you press the button.
[1] (Low) [2] (Medium)
[OFF] (No
correction)
[3] (High)
Attention
z
When this is set for an input signal with less noise,
the image may look different from what it originally
was. In such case, set it to [OFF].
[DYNAMIC IRIS]
Aperture correction and signal compensation are
performed automatically based on the image to result
in an image of optimum contrast.
1) Press

to select [DYNAMIC IRIS].
2) Press
󱚣󱚤
or the <ENTER> button.
z
The [DYNAMIC IRIS] individual adjustment
screen is displayed.
3) Press
󱚣󱚤
to switch the [DYNAMIC
IRIS].
z
The setting will change as follows each time
you press the button.
[OFF] (No
correction)
[1] (Small)
[2]
(Medium)
[USER] [3] (Large)
To adjust desired correction
amount
4) Select [USER] in Step 3).
5) Press the <ENTER> button.
z
The [DYNAMIC IRIS] screen is displayed.
6) Press

to select the item you want
to adjust, and press
󱚣󱚤
to adjust the
correction amount.
z
Auto Iris (Automatic adjustment of
aperture)
[OFF] (no automatic
adjustment)
[1] (Small)
[255] (Large)
[254] (Medium) [2] (Medium)
(Increments of 1)
z
Manual Iris (Fixed adjustment of
aperture)
[OFF] (no xed
aperture)
[1] (Small)
[255] (Large)
[254] (Medium) [2] (Medium)
(Increments of 1)
z
Dynamic Gamma (adjustment of signal
compensation)
[OFF] (no automatic
compensation)
[1] (Small)
[3] (Large) [2] (Medium)
Note
z
When [DYNAMIC GAMMA] is set [3], the contrast
will be maximized.
z
Luminance control and iris operate simultaneously,
but the iris will not operate if left fully open while
brightness is being measured.
71

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic PT-DS20KU wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Panasonic PT-DS20KU

Panasonic PT-DS20KU Bedienungsanleitung - Deutsch - 190 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info