598890
92
Zoom out
Zoom in
Vorherige Seite
1/129
Nächste Seite
SECURITY menu
92
- ENGLISH
Settings
DISPLAY SETTING
You can set your original text, such as company
name or URL information, to display regularly on the
projected image while projecting.
Press ▲▼ to select [DISPLAY 1 )
SETTING].
Press ◄► to switch [DISPLAY 2 )
SETTING].
The setting will change as follows each time
z
◄► is pressed.
OFF TEXT LOGO1
OFF The text display is disabled.
TEXT The text display is enabled.
LOGO1
The picture registered by the user
will be projected.
Note
Separate software [Logo Transfer Software] is required in
z
order to create the pictures to use for [LOGO1]. Consult
your dealer.
TEXT CHANGE
You can enter your original text to be displayed when
[DISPLAY SETTING] is turned [TEXT].
Press ▲▼ to select [TEXT CHANGE].1 )
Press <ENTER> button.2 )
The [TEXT CHANGE] screen will be displayed.
z
Press ▲▼◄► to select characters 3 )
and press <ENTER> button to input
them.
Press ▲▼◄► to select [OK], and 4 )
press <ENTER> button.
The text is now changed.
z
MENU LOCK
You can lock <MENU> button function and the
password will be asked to display the menu every
time.
Press ▲▼ to select [MENU LOCK].1 )
Press ◄► to switch [MENU LOCK].2 )
The setting will change as follows each time
z
◄► is pressed.
OFF ON
OFF
Deactivate the [MENU LOCK]
system.
ON Activate the [MENU LOCK] system.
Note
Once [MENU LOCK] is set to [ON], you cannot use
z
<MENU> button unless you input the correct password.
The [MENU LOCK] is set to [OFF] by default and when
z
initialized.
The unlock state is maintained until the projector is set to
z
the standby mode.
MENU LOCK PASSWORD
You can change the password for [MENU LOCK]
system to your original.
Press ▲▼ to select [MENU LOCK 1 )
PASSWORD].
Press <ENTER> button.2 )
The [MENU LOCK PASSWORD] screen will be
z
displayed.
Press ▲▼◄► to select characters 3 )
and press <ENTER> button to input
them.
Press ▲▼◄► to select [OK], and 4 )
press <ENTER> button.
To stop, select [CANCEL].
z
Attention
The factory default password is “AAAA”.
z
When the projector is initialized, the password will be
z
changed to the factory default setting, “AAAA”.
Change the MENU LOCK PASSWORD regularly and
z
make it uneasy to guess.
92

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic PT-DS8500 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info