598882
211
Zoom out
Zoom in
Vorherige Seite
1/223
Nächste Seite
Chapter 6Appendix — Technical information
ENGLISH - 211
Compatible signal
Resolution
(Dots)
Scanning freq.
Dot clock
freq.
(MHz)
Format
Plug and play
*1
Horizontal
(kHz)
Vertical
(Hz)
RGB2
DVI-D
HDMI
EDID1 EDID2 EDID3
1920 x 1200
1 920 x 1 200 61.8 49.9 158.3 R/D/H
1 920 x 1 200
*11
74.0 60.0 154.0 R/D/H
l
l l
*14
l
*14
1 920 x 1 200
*13
74.6 59.9 193.3 R
*1 Signals with a l in the Plug and play columns are signals described in EDID (extended display identication data) of the projector. If a signal has no
l in the Plug and play columns but has an entry in the Format column, it can be input. For signals without a l in the Plug and play columns, there
are instances when resolution cannot be selected on the computer even though the projector supports them.
*2 Only for single link connection
*3 Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
*4 When a 1125 (1035)/60i signal was input, it is displayed as a 1125 (1080)/60i signal.
*5 Dual link 3G-SDI is supported for PT-DZ21K2 and PT-DS20K2.
*6 Only for PT-DZ16K2
*7 Only for PT-DZ21K2, PT-DS20K2
*8 Dual link HD-SDI is supported.
*9 Dual link 3G-SDI is supported.
*10 For PT-DZ21K2, PT-DS20K2, when [3D INPUT FORMAT] is set to [AUTO], it is displayed as a 3D image in frame sequential format. To display
images in 2D, set [3D INPUT FORMAT] to [NATIVE].
*11 VESA CVT-RB (Reduced Blanking)-compliant
*12 Only for PT-DW17K2
*13 Samples the pixels in the image processing circuit and projects the image.
*14 Only for PT-DZ21K2
Note
f A signal with a different resolution is converted to the number of display dots. The number of display dots is as follows.
g PT-DZ21K2: 1 920 x 1 200
g PT-DS20K2: 1 400 x 1 050
g PT-DW17K2: 1 366 x 768
g PT-DZ16K2: 1 920 x 1 080
f The “i” at the end of the resolution indicates an interlaced signal.
f When interlaced signals are connected, ickering may occur on the projected image.
f DIGITAL LINK input compatible signal is the same as HDMI input compatible signal.
List of simultaneous input 2D compatible signals
The following table species the simultaneous input (2D) compatible video signals that the projector can project.
2D compatible signal
Resolution
(Dots)
Scanning freq.
Dot clock freq.
(MHz)
HDMI/DVI SDI1/SDI2
*1
Horizontal
(kHz)
Vertical
(Hz)
1080/50p 1 920 x 1 080 56.3 50.0 148.5
l l
1080/60p 1 920 x 1 080 67.5 60.0 148.5
l l
1366 x 768
1 366 x 768 39.6 49.9 69.0
l
1 366 x 768 47.7 59.8 85.5
l
1400 x 1050
1 400 x 1 050 54.1 50.0 99.9
l
1 400 x 1 050 65.3 60.0 121.8
l
1920 x 1080
1 920 x 1 080 55.6 49.9 141.5
l
1 920 x 1 080 66.6 59.9 138.5
l
1920 x 1200
1 920 x 1 200 61.8 49.9 158.3
l
1 920 x 1 200 74.0 60.0 154.0
l
*1 Only for PT-DZ21K2, PT-DS20K2
211

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic PT-DW17K2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Panasonic PT-DW17K2

Panasonic PT-DW17K2 Bedienungsanleitung - Deutsch - 228 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info