Bedienungsanleitung Panasonic PT-DW6300 (Seite 19 von 52) (Englisch)

511554

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

POSITION menu

ENGLISH - 19

Settings

J Menu items displaying pattern depends on signals

You can control the digital zoom scale vertically and

horizontally, and digital zoom area. See “SCREEN SETTING”

on page 25.

Zooming range: 50% to 999%

Q When ASPECT setting is DEFAULT

You can change the zoom area in the setting of

SCREEN FORMAT in SCREEN SETTING.

Press I H to change the zoom scale of VERTICAL and

HORIZONTAL.

Q When ASPECT setting is THROUGH

Digital zoom is not available.

Q When ASPECT setting is others

Zoom area is the setting of SCREEN FORMAT in

SCREEN SETTING.

Press I H to change the zoom scale of VERTICAL and

HORIZONTAL.

If you have interference patterns of the projected image, which

is sometimes referred to as moire or noise, you can fine adjust

the timing of the clock. (Signals from RGB 1 IN/RGB 2 IN only)

(PT-DZ6710 only)

You can project on to specially shaped screens, such as

distortional and cylindrical shaped screens, using unique

image processing system. Press I H to cycle through the

options.

Signals from RGB 1 IN/RGB 2 IN/DVI-D IN and SDI (PT-DZ6710 only)

DEFAULT H THROUGH H 16:9 H 4:3 H H-FIT H V-FIT H HV-FIT H DEFAULT

Signals from S-VIDEO IN

VID AUTO H S1 AUTO H VID AUTO(PRI.) H THROUGH H 16:9 H 4:3 H H-FIT H V-FIT H HV-FIT H VID AUTO

Signals from other terminals

VID AUTO H THROUGH H 16:9 H 4:3 H H-FIT H V-FIT H HV-FIT H VID AUTO

NOTE:

• If you project an image with an unmatched aspect ratio, the image may distort or some portions may be cropped. Select an aspect ratio

which preserves the intention of the image creator.

• The order of ASPECT types is defined not only by the input method but also by the input signals.

• If you project a copyrighted image enlarged or distorted by using ASPECT function in commercial use in a public place, such as a

restaurant or hotel, you might infringe on the copyright of the creator which is protected by copyright law.

• Selectable aspect ratio options vary according to input signals.

ZOOM

INTERNAL

Zoom area is the factory default setting

of SCREEN FORMAT in SCREEN

SETTING.

FULL

Zoom area is the setting of SCREEN

FORMAT in SCREEN SETTING.

CLOCK PHASE

NOTE:

• With PT-DW6300 and PT-D6000, if the projecting signal’s dot

clock frequency is higher than 150 MHz, the adjustment may

not make a difference.

GEOMETRY

OFF Deactive

KEYSTONE

Adjusts projected image when

distorted to a trapezoid.

CURVED

Adjusts projected image when

distorted to a curved surface.

For performing geometry correction

from a connected computer.

NOTE:

• GEOMETRY adjustment should be carried out by a person

who is familiar with the projector or by a service person

because a high level of skill is required to make successful

adjustment.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic PT-DW6300 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic PT-DW6300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info