Bedienungsanleitung Panasonic PT-DW6300 (Seite 33 von 52) (Englisch)

511554

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

ENGLISH - 33

Settings

SIGNAL LIST

J SIGNAL LIST and SUB MEMORY

LIST

You can register a input signal as a SIGNAL LIST data,

and several sets of adjusted settings for the signal as

SUB MEMORY LIST data.

J Managing the list and the

registered data

Q Registering a signal to the list

When a new format input signal is applied to the

projector, press the MENU button to register to the

SIGNAL LIST.

Q Displaying the signal list and the status

1. Select SIGNAL LIST in the main menu.

2. Press the ENTER button.

Display the REGISTERED SIGNAL LIST.

3. Select the required signal data.

4. Press the ENTER button.

Displays the REGISTERED SIGNAL STATUS.

Q Renaming a registered data

You can rename the automatically determined registered

signal data.

1. Display the REGISTERED SIGNAL LIST and select the

required signal data.

2. Press the ENTER button.

Displays the REGISTERED SIGNAL STATUS of the

signal.

3. Press the ENTER button.

Displays the character list.

4. Select the required character by pressing F G I H

and press the ENTER button.

Repeat until complete the name.

You can enter the characters up to 16.

5. Select OK and press the ENTER button.

Displays the REGISTERED SIGNAL STATUS with NAME

renamed.

Select CANCEL and press the ENTER button to return to

the REGISTERED SIGNAL STATUS without any change.

Q Deleting a registered data

You can delete a registered data from the REGISTERED

SIGNAL LIST.

1. Display the REGISTERED SIGNAL LIST and select the

required signal data.

2. Press the DEFAULT button.

Displays the REGISTERED SIGNAL STATUS of the signal

for confirmation to delete.

3. Press the ENTER button.

Displays REGISTERED SIGNAL LIST and confirm the

data is deleted.

Press the MENU button to cancel and return to the

REGISTERED SIGNAL LIST without any change.

NOTE:

• You can register data up to 96 in total number of the signal

data and any corresponding sub memory data.

• The names of the registered data are automatically

determined by the input signals and memory numbers.

• If a menu is being displayed, the new signals will be registered

at the instant they are input.

NOTE:

• The memories are numbered over 12 pages (A to L: 8 data

items can be registered on each page), and the data is

registered in the unused memory with the lowest number. If all

the memories are used, the data of the old signals is

overwritten in sequence.

• When a new input signal is applied while the menu is

displayed, the signal will be registered to the list.

Remote control

See “Navigating through the menu” on page 15.

See “Main menu and Sub-menu” on page 12.

NAME Input signal name

MEMORY NO. Location address of registered data

INPUT Connected input terminal

fH Horizontal frequency

fV Vertical frequency

SYNC.STATE Polarity synchronisation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic PT-DW6300 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic PT-DW6300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info