Bedienungsanleitung Panasonic PT-DW640E (Seite 68 von 132) (Englisch)

543723

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

68 - ENGLISH

Chapter 4 Settings — [DISPLAY OPTION] menu

[DISPLAY OPTION] menu

Select [DISPLAY OPTION] from the main menu, and select the item from the sub-menu.

Refer to “Navigating through the menu” (

page 51) for the operation of the menu screen.

After selecting the item, press

asqw

to set.

[COLOR MATCHING]

You can correct the color difference between the sets when multiple sets are to be used simultaneously.

To adjust the color matching as desired

Press as to select [COLOR MATCHING].

Press qw to switch [COLOR MATCHING].

The setting will change among [OFF], [3COLORS], [7COLORS]

and [MEASURED] each time you press the button.

Select [3COLORS] or [7COLORS], and press

the <ENTER> button.

The [3COLORS] or [7COLORS] screen is displayed.

Press as to select [RED], [GREEN] or [BLUE]

([RED], [GREEN], [BLUE], [CYAN], [MAGENTA],

[YELLOW], or [WHITE] for [7COLORS]).

Press the <ENTER> button.

The [3COLORS:RED], [3COLORS:GREEN], [3COLORS:BLUE],

or [3COLORS:WHITE] screen is displayed.

In the case of [7COLORS], the [7COLORS:RED],

[7COLORS:GREEN], [7COLORS:BLUE], [7COLORS:CYAN],

[7COLORS:MAGENTA], [7COLORS:YELLOW], or

[7COLORS:WHITE] screen is displayed.

Press as to select [RED], [GREEN], or [BLUE].

If [WHITE] is selected from [3COLORS], only [GAIN] can be

adjusted.

Press qw to adjust.

Adjustment value will change between 0

and 2 048.

* The lower limit differs depending on the color to be adjusted.

[COLOR MATCHING]

[OFF] Color matching adjustment is not carried out.

[3COLORS] The three colors [RED], [GREEN], and [BLUE] can be adjusted.

[7COLORS]

The seven colors [RED], [GREEN], [BLUE], [CYAN], [MAGENTA], [YELLOW], and [WHITE] can be

adjusted.

[MEASURED] Refer to “To adjust the color matching using a colorimeter” (

page 68) for details about this mode.

Note

Operation when correcting the adjustment color

When the correction color same as the adjustment color is changed: The luminance of the adjustment color changes.

When correction color red is changed: Red is added to or subtracted from the adjustment color.

When correction color green is changed: Green is added to or subtracted from the adjustment color.

When correction color blue is changed: Blue is added to or subtracted from the adjustment color.

This adjustment should be carried out by a person who is familiar with the projector or by a service person because a high level of skill is

required to make a successful adjustment.

Pressing the <DEFAULT> button will restore the factory default settings for all items.

When [COLOR MATCHING] is set to other than [OFF], [AI] and [COLOR CORRECTION] are xed to [OFF], and [COLOR TEMPERATURE]

is xed to [USER]. (However, [WHITE BALANCE HIGH] cannot be adjusted.)

To adjust the color matching using a colorimeter

Use a colorimeter that can measure chromaticity coordinates and luminance to change the colors [RED], [GREEN], [BLUE], [CYAN],

[MAGENTA], [YELLOW], and [WHITE] to desired colors.

Press as to select [COLOR MATCHING].

Press qw to select [MEASURED].

Press the <ENTER> button.

The [MEASURED MODE] screen is displayed.

Press as to select [MEASURED DATA].

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic PT-DW640E Seite 68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic PT-DW640E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info