Bedienungsanleitung Panasonic PT-DW830E (Seite 58 von 190) (Englisch)

543731

Zoom out

Zoom in

Vorherige Seite

1/190

Nächste Seite

Chapter 3 Basic Operations — Projecting

58 - ENGLISH

Projecting

Check the projection lens attachment (x page 48), external device connection (x page 49), power cord connection (x page 54),

switch on the power (x page 55) to start projecting. Select the video for projection, and adjust appearance of the projected image.

Selecting the input signal

Select an input signal.

1) Press the input selection (<RGB1/RGB2> or <RGB1/2>, <DIGITAL LINK>, <DVI-D>, <VIDEO>, <SDI>,

<HDMI>) buttons on the remote control or the control panel.

f The image of the signal being input in the selected terminal is projected.

Attention

f Images may not be projected properly depending on the external device, or the blu-ray disc or DVD disc, to be played back.

Set the [PICTURE] menu → [SYSTEM SELECTOR].

f Conrm the aspect ratio of the projection screen and the image, and switch to an optimum aspect ratio from the [POSITION] menu →

[ASPECT].

Adjusting the focus, zoom, and shift

If the projected image or the position is not correct when the positioning of the projector and the screen is correctly installed, adjust the focus,

zoom, and shift.

Using the control panel

1) Press the <LENS> button on the control panel.

f Pressing the button changes the adjustment screen in the order of [FOCUS], [ZOOM], and [SHIFT].

2) Select each item and press asqw to adjust it.

Using the remote control

1) Press the lens (<FOCUS>, <ZOOM>, <SHIFT>) buttons on the remote control.

f <FOCUS> button: Adjusts focus.

f <ZOOM> button: Adjusts zoom.

f <SHIFT> button: Adjusts shift.

2) Select each item and press asqw to adjust it.

Caution

During the lens shift operation, do not insert your hand in any opening around the lens.

Your hand may be caught and result in injuries.

Note

f When the projection lens without the zoom function is attached, the zoom adjustment screen will be displayed. However, operation is not

possible.

f Use the xed-focus lens (Model No.: ET-DLE055) with the lens position set to the home position. (x page 59)

f The adjustment can be performed quickly by pressing and holding asqw for at least three seconds.

f It is recommended that images be projected continuously for at least 30 minutes before the focus is adjusted.

f Only [FOCUS] is shown in yellow so that the displayed menu item can be recognized by color, even when the projector is not focused and

displayed characters are unreadable. (Factory default)

The display color of [FOCUS] depends on the setting of the [DISPLAY OPTION] menu → [ON-SCREEN DISPLAY] → [OSD DESIGN].

f When the projector is switched off during the shift adjustment, lens calibration needs to be performed the next time the projector is switched

on. (x page 122)

f When the main power is switched off during shift adjustment, a lens calibration error screen will be displayed during the next shift

adjustment. Execute the [PROJECTOR SETUP] menu → [LENS CALIBRATION].

f When the lens calibration error is displayed even though [LENS CALIBRATION] was executed, ask your dealer to repair the unit.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic PT-DW830E Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic PT-DW830E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info