Bedienungsanleitung Panasonic PT-DW830E (Seite 76 von 190) (Englisch)

543731

Zoom out

Zoom in

Vorherige Seite

1/190

Nächste Seite

Chapter 4 Settings — [PICTURE] menu

76 - ENGLISH

[2] Moderately corrects aperture and signal.

[3] Strongly corrects aperture and signal.

[USER]

Set any desired correction.

Refer to “Adjusting desired correction amount” (x page 76) for details.

Adjusting desired correction amount

1) Press as to select [DYNAMIC IRIS].

2) Press qw or the <ENTER> button.

f The [DYNAMIC IRIS] individual adjustment screen is displayed.

3) Press qw to select [USER].

4) Press the <ENTER> button.

f The [DYNAMIC IRIS] screen is displayed.

5) Press as to select [AUTO IRIS], [MANUAL IRIS], or [DYNAMIC GAMMA].

6) Press qw to adjust the correction amount.

Item Adjustment

[AUTO IRIS]

(Automatic adjustment of

aperture)

[OFF] No correction.

[1] - [255]

Allows you to set in increments of 1. The larger the value, the

stronger the correction.

[MANUAL IRIS]

(Fixed adjustment of aperture)

[OFF] No correction.

[1] - [255]

Allows you to set in increments of 1. The larger the value, the

stronger the correction.

[DYNAMIC GAMMA]

(Adjustment of signal

compensation)

[OFF] No correction.

[1] Slightly compensates the signal.

[2] Moderately compensates the signal.

[3] Strongly compensates the signal.

Note

f When [DYNAMIC GAMMA] is set to [3], the contrast will be maximized.

f Brightness control and dynamic iris operate simultaneously, but the iris is fully open and does not operate while a brightness measurement

is performed.

f If [DLP Link] is set to [ON], [DYNAMIC IRIS] is xed to [OFF] while 3D images are displayed.

[SYSTEM SELECTOR]

The projector will automatically detect the input signal, but you can set the system method manually when an unstable signal is input. Set the

system method matching the input signal.

1) Press as to select [SYSTEM SELECTOR].

2) Press the <ENTER> button.

3) Press as to select a system format.

f If inputting signals via the <SDI IN> terminal connection, select the system method by pressing asqw. (Only for PT-DZ870E)

f Available system formats vary depending on the input signal.

Terminal System format

<VIDEO IN> terminal, <G/

Y>/<B/P

/C> terminals

Select [AUTO], [NTSC], [NTSC4.43], [PAL], [PAL-M], [PAL-N], [SECAM], or [PAL60].

Set it to [AUTO] normally. (Setting [AUTO] will automatically select [NTSC], [NTSC4.43], [PAL],

[PAL-M], [PAL-N], [SECAM], or [PAL60].)

Switch the setting to the signal method for the TV used.

<RGB 1 IN> terminal, <RGB 2

IN> terminal

480i, 576i, or 576p signal Select [RGB] or [YC

VGA60 or 480p signal Select from [VGA60], [480p YC

], or [480p RGB].

Other movie-based signals Select [RGB] or [YP

<DVI-D IN> terminal

480i, 576i, 480p, or 576p

signal

Select [RGB] or [YC

Other movie-based signals Select [RGB] or [YP

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic PT-DW830E Seite 76

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic PT-DW830E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info