Bedienungsanleitung Panasonic PT-DW830E (Seite 95 von 190) (Englisch)

543731

Zoom out

Zoom in

Vorherige Seite

1/190

Nächste Seite

Chapter 4 Settings — [DISPLAY OPTION] menu

ENGLISH - 95

[DISPLAY OPTION] menu

On the menu screen, select [DISPLAY OPTION] from the main menu, and select an item from

the sub-menu.

Refer to “Navigating through the menu” (x page 65) for the operation of the menu screen.

f After selecting the item, press asqw to set.

[COLOR MATCHING]

Correct the color difference between projectors when using multiple projectors simultaneously.

Adjusting the color matching as desired

1) Press as to select [COLOR MATCHING].

2) Press qw to switch the item.

f The items will switch each time you press the button.

[OFF] Color matching adjustment is not carried out.

[3COLORS] Adjusts the three colors [RED], [GREEN], or [BLUE].

[7COLORS] Adjusts the seven colors [RED], [GREEN], [BLUE], [CYAN], [MAGENTA], [YELLOW], or [WHITE].

[MEASURED]

Refer to “Adjusting the color matching using a colorimeter” (x page 95) for details about this mode.

3) Select [3COLORS] or [7COLORS], and press the <ENTER> button.

f The [3COLORS] or [7COLORS] screen is displayed.

4) Press as to select [RED], [GREEN], or [BLUE] ([RED], [GREEN], [BLUE], [CYAN], [MAGENTA],

[YELLOW], or [WHITE] for [7COLORS]).

5) Press the <ENTER> button.

f The [3COLORS:RED], [3COLORS:GREEN], or [3COLORS:BLUE] screen is displayed.

For [7COLORS], the [7COLORS:RED], [7COLORS:GREEN], [7COLORS:BLUE], [7COLORS:CYAN], [7COLORS:MAGENTA],

[7COLORS:YELLOW], or [7COLORS:WHITE] screen is displayed.

f Set [AUTO TESTPATTERN] to [ON] to display a test pattern of selected colors.

6) Press as to select [RED], [GREEN], or [BLUE].

7) Press qw to adjust.

f The adjustment value changes between 0

and 2 048.

*1 The lower limit varies depending on the adjusting color.

Note

f Operation when correcting the adjustment color

When the correction color same as the adjustment color is changed: The luminance of the adjustment color changes.

When correction color red is changed: Red is added to or subtracted from the adjustment color.

When correction color green is changed: Green is added to or subtracted from the adjustment color.

When correction color blue is changed: Blue is added to or subtracted from the adjustment color.

f This adjustment should be carried out by a person who is familiar with the projector or by a service person because a high level of skill is

required to make a successful adjustment.

f Pressing the <DEFAULT> button on the remote control will restore the factory default settings for all items.

f If [COLOR MATCHING] is set to other than [OFF], [COLOR CORRECTION] is xed to [OFF], and [COLOR TEMPERATURE] is xed to

[USER1]. (However, [WHITE BALANCE HIGH] cannot be adjusted.)

Adjusting the color matching using a colorimeter

Use a colorimeter that can measure chromaticity coordinates and luminance to change the colors [RED], [GREEN], [BLUE], [CYAN],

[MAGENTA], [YELLOW], or [WHITE] to desired colors.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic PT-DW830E Seite 95

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic PT-DW830E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info