544151
90
Zoom out
Zoom in
Vorherige Seite
1/190
Nächste Seite
Chapter 4Settings — [3D SETTINGS] menu
90 - ENGLISH
[3D SETTINGS] menu
On the menu screen, select [3D SETTINGS] from the main menu, and select an item from the
sub-menu.
Refer to “Navigating through the menu” (x page 65) for the operation of the menu screen.
f After selecting the item, press asqw to set.
[3D SYSTEM SETTING]
Set a picture display method for use during 3D signal input as necessary for the 3D system in use.
1) Press as to select [3D SYSTEM SETTING].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[SINGLE]
During 3D signal input, images for the right eye and images for the left eye are alternately displayed
with the frame sequential system.
[DUAL (LEFT)] Only images for the left eye are displayed during 3D signal input.
[DUAL (RIGHT)] Only images for the right eye are displayed during 3D signal input.
Note
f When 2D images are input, 2D images are displayed regardless of [3D SYSTEM SETTING] settings.
[DLP Link]
You can set this function when using the 3D eyewear that supports DLP Link.
1) Press as to select [DLP Link].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[ON] Enables the DLP Link function.
[OFF] Disables the DLP Link function.
Note
f If [DLP Link] is set to [ON], [DYNAMIC IRIS] is xed to [OFF] while 3D images are displayed.
[3D SYNC SETTING]
Set the way in which the <3D SYNC 1 IN/OUT> terminal and the <3D SYNC 2 OUT> terminal will be used.
Attention
f Before connecting external devices to the <3D SYNC 1 IN/OUT> terminal and the <3D SYNC 2 OUT> terminal using cables, complete the
[3D SYNC MODE] setting and conrm that the external devices to be connected are turned off.
f Changing [3D SYNC MODE] while the cables are connected may result in malfunctions of the projector or the connected external devices.
1) Press as to select [3D SYNC SETTING].
2) Press the <ENTER> button.
f The precaution message related to [3D SYNC SETTING] is displayed.
3) Press the <ENTER> button.
f The [3D SYNC SETTING] screen is displayed.
4) Press as to select [3D SYNC MODE].
90

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic PT-DW830EK wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info