544151
160
Zoom out
Zoom in
Vorherige Seite
1/190
Nächste Seite
Chapter 5Maintenance — Maintenance/replacement
160 - ENGLISH
Cleaning the air lter
Remove the air lter beforehand with the previously described procedure of “Removing the air lter”.
1) Clean the air filter.
f Vacuum dust from the air lter with a vacuum cleaner.
Attaching the air lter
Fig. 1
Air filter (to the lamp unit 2)
Air filter case
Air filter (to the lamp unit 1)
1) Attach the air filter. (Fig. 1)
f Insert the air lter to the lter case rib securely.
2) Attach the air filter case to the projector.
f Push in the air lter case securely until the clicking sound is made.
3) Attach the lamp unit cover.
f Close the lamp unit cover in the reverse order of Step 1) of “Removing the air lter”.
f Attach the lamp unit cover so that the connector of the lamp unit cover is inserted to the fan power connector securely.
f Use a Phillips screwdriver to rmly tighten the lamp unit xing screw (x1).
f Make sure to attach the lamp unit cover securely.
Note
f Make sure that the air lter case is properly attached before using the projector. If it is not properly attached, the projector will suck in dirt
and dust causing a malfunction.
f If you use the projector without attaching the air lter case, the lter indicator <FILTER> ashes in red and the message appears on the
projection screen for approximately 30 seconds.
f Do not use water when washing the air lter. Washing with water may decrease the dust absorption capability.
f When the dust remains after cleaning, it is time to replace the air lter.
The air lter for replacement (TMZX5209) is an optional accessory (service part). To purchase the product, consult your dealer.
One air lter is provided for the optional Replacement lamp unit (Model No.: ET-LAD120 (1 pc)), and two air lters are provided for the
optional Replacement lamp unit (Model No.: ET-LAD120W (2 pcs)).
Replacing the unit
Lamp unit
The lamp unit is a consumable component. Refer to “When to replace the lamp unit” (x page 161) for details about the replacement cycle.
When purchasing the optional accessory of Replacement lamp unit (Model No.: ET-LAD120 (1 pc), ET-LAD120W (2 pcs)), consult your dealer.
It is recommended that you request a qualied technician to replace the lamp unit. Consult your dealer.
Warning
Replace the lamp unit after the lamp has cooled (after waiting at least one hour).
The high temperature inside the cover will cause burns.
160

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic PT-DW830EK wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info