Bedienungsanleitung Panasonic PT-DX500U (Seite 37 von 95) (Englisch)

543625

Zoom out

Zoom in

Vorherige Seite

1/95

Nächste Seite

Basic operations using the remote control

ENGLISH -

Basic Operation

Automatic adjustment

The automatic setup function can be used to

automatically adjust the resolution, clock phase and

picture position when analog RGB signals consisting

of bitmap images such as computer signals are being

input, or to automatically adjust the picture position

when DVI-D/HDMI signals are being input.

It is recommended to supply images with a bright

white frame at the outermost periphery containing

characters etc. that are clear in white and black

contrast when the system is in automatic adjustment

mode.

Avoid supplying images that involve halftones

or gradation such as photographs and computer

graphics.

button

Press <AUTO SETUP> button on the

remote control or the main unit.

A message [COMPLETE] appears if adjustment is

ended normally.

Note

[CLOCK PHASE] may have been shifted even when the

adjustment ended normally. In this case, manually adjust

the [CLOCK PHASE].

Refer to “CLOCK PHASE” of “POSITION menu”

(

page 49) for details.

If an image with blurred edges or a dark image is input,

[INCOMPLETE] may appear or adjustment may not

be performed properly even if [COMPLETE] appears.

In this case, manually adjust the items of “INPUT

RESOLUTION” of “ADVANCED MENU” (

page 51),

“SHIFT” and “CLOCK PHASE” of “POSITION menu”

(

pages 47, 49).

For specic signals, adjustment should be made

according to “AUTO SETUP” of “DISPLAY OPTION

menu” (

page 56).

[AUTO SETUP] may not be available depending on the

machine type of the personal computer.

Automatic adjustment may not available for

synchronization signal of C-SYNC and G-SYNC.

Image may be distorted for several seconds during

automatic adjustment. This is not a malfunction.

For every supplied signal, adjustment is required.

Automatic adjustment can be canceled by pressing

<MENU> button during the course of automatic

adjustment.

Even for an RGB signal for which automatic setup is

possible, if automatic setup is performed while moving

images are being input, [INCOMPLETE] may appear,

or adjustment may not be performed properly even if

[COMPLETE] appears.

Using the function buttons

Three function buttons (<FUNCTION1 to 3>) on the

remote control and the <FUNCTION1> button on the

projector can be assigned to any frequent operations.

They can be used as a useful shortcut button.

buttons

Press any of the <FUNCTION1 to 3> 1 )

buttons on the remote control or the

<FUNCTION1> button on the projector.

Press <MENU> button on the remote 2 )

control or the projector to select a

menu option (Main Menu, Submenu or

Advanced Menu).

For the on-screen menu selection, see

“On-

screen menu". (

page 39)

Hold down any of the <FUNCTION1 3 )

to 3> buttons on the remote control

or the <FUNCTION1> button on the

projector more than 3 seconds.

Note

For details, see

“FUNCTION BUTTON” of “PROJECTOR

SETUP”. (

page 66)

Using ECO button

Displays [ECO MANAGEMENT] menu.

button

Press <ECO> button on the remote

control.

Note

For details, see

“ECO MANAGEMENT” of “PROJECTOR

SETUP". (

page 63)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic PT-DX500U Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic PT-DX500U

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info