511533
123
Zoom out
Zoom in
Vorherige Seite
1/187
Nächste Seite
Chapter 4Settings — [PROJECTOR SETUP] menu
ENGLISH - 123
Loading the lens position
1) Press as to select [LENS MEMORY].
2) Press the <ENTER> button.
3) Press as to select [LENS MEMORY LOAD].
4) Press the <ENTER> button.
f The [LENS MEMORY LOAD] screen is displayed.
5) Press as to select the item to load, and press the <ENTER> button.
6) When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
f The lens moves automatically to the registered shift, zoom, and focus positions.
Note
f Lens memory is not guaranteed to be 100 % reproduced.
f The zoom and focus positions may have shifted after lens memory was loaded. Readjust as necessary.
f Beware of shift, as errors in zoom position are particularly signicant.
f When a lens is replaced, readjust and save the lens memory again.
f If a lens without zoom function is used, the lens memory of the zoom position does not operate.
f When [LENS MEMORY LOAD] is assigned to the <FUNC> button, the lens memory is loaded in order each time you press the <FUNC>
button.
Deleting a lens memory
1) Press as to select [LENS MEMORY].
2) Press the <ENTER> button.
3) Press as to select [LENS MEMORY EDIT].
4) Press the <ENTER> button.
f The [LENS MEMORY EDIT] screen is displayed.
5) Press as to select [LENS MEMORY DELETE].
6) Press the <ENTER> button.
f The [LENS MEMORY DELETE] screen is displayed.
7) Press as to select the item to delete, and press the <ENTER> button.
8) When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
Changing the lens memory name
1) Press as to select [LENS MEMORY].
2) Press the <ENTER> button.
3) Press as to select [LENS MEMORY EDIT].
4) Press the <ENTER> button.
f The [LENS MEMORY EDIT] screen is displayed.
5) Press as to select [LENS MEMORY NAME CHANGE].
6) Press the <ENTER> button.
f The [LENS MEMORY NAME CHANGE] screen is displayed.
7) Press as to select the name to change, and press the <ENTER> button.
f The [LENS MEMORY NAME INPUT] screen is displayed.
8) Press asqw to select the text, and press the <ENTER> button to enter the text.
9) After the name is changed, press asqw to select [OK], and press the <ENTER> button.
f The registration completes and returns to the [LENS MEMORY NAME CHANGE] screen.
123

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic PT-DZ10KE wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Panasonic PT-DZ10KE

Panasonic PT-DZ10KE Bedienungsanleitung - Deutsch - 198 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info