Bedienungsanleitung Panasonic PT-DZ16KE (Seite 148 von 176) (Englisch)

598887

148

Zoom out

Zoom in

Vorherige Seite

1/176

Nächste Seite

Chapter 5 Maintenance — Maintenance/replacement

148 - ENGLISH

ii) Hold the lamp unit cover securely and slide it in the direction of the arrow, and then remove it by pulling it out backwards.

f Since the fan and other components are attached to the lamp unit cover, handle the removed lamp unit cover with care.

3) Pull out the lamp case.

i) Use a Phillips screwdriver to turn the lamp case fixing screws (x2 each) on the side where the lamp unit to be replaced has been

attached counterclockwise until they turn freely. (Fig. 2)

f Do not remove the black screws other than the lamp case xing screws.

f If you loosen the lamp case xing screws with the projector installed upward in the vertical direction, the lamp case may drop off on its

weight. Take extra care by holding the lamp case handle when loosening the lamp case xing screws.

ii) Hold the handle of the lamp case on the side where the lamp unit to be replaced has been attached and pull out the lamp case

backwards. (Fig. 3)

f When pulling out the lamp case, make sure that the projector is stable, and perform the replacement in a safe place even if you drop it

accidentally.

4) Remove the lamp unit. (Fig. 4)

i) Use a Phillips screwdriver to turn the lamp unit fixing screws (x2) counterclockwise until they turn freely, and then remove the lamp unit

from the lamp case.

f Hold the lamp unit handles and remove the lamp unit.

f Do not remove screws other than the lamp unit xing screws.

Attaching the lamp unit

(a)

(b)

ii)

Lamp case RLamp case L

Lamp case fixing screw

Lamp case handle

Groove for the guide to attach the lamp case

Fan power connector

Guide to attach the lamp case

Fig. 1 Fig. 2

1) Attach the lamp unit.

f Slowly insert a new lamp unit into the lamp case. Attach the lamp unit so that the guide pins t into the guide holes of the lamp unit.

f If you are having difculty attaching the lamp unit, remove it rst and then push it in again slowly. Pushing it in quickly or forcibly may

break the connector.

2) Use a Phillips screwdriver to firmly tighten the lamp unit fixing screws (x2 each).

f Make sure to attach the lamp unit securely.

3) Attach the lamp case. (Fig. 1)

f Slowly insert the lamp case into the projector along the grooves for the guide to attach the lamp case, then rmly tighten the lamp case

xing screws (x2).

f If you secure the lamp case with the projector installed upward in the vertical direction, the lamp case may drop off on its weight. Take

extra care by holding the lamp case handle when tightening the lamp case xing screws.

f If you are having difculty attaching the lamp case, remove it rst and then push it in again slowly. Pushing it in quickly or forcibly may

break the connector.

f Make sure to attach the lamp case securely.

4) Attach the lamp unit cover. (Fig. 2)

i) Align the mark (a) with the mark (b) (E and A) and attach the lamp unit cover as shown by the arrow.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic PT-DZ16KE Seite 148

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic PT-DZ16KE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info