Bedienungsanleitung Panasonic PT-DZ21KE (Seite 79 von 179) (Englisch)

511534

Zoom out

Zoom in

Vorherige Seite

1/179

Nächste Seite

[ADVANCED MENU]

ENGLISH - 79

Settings

■

To display the adjustment marker

7) Press



to select [MARKER].

8) Press

󱚣󱚤

to switch [ON].



A marker for image position adjustment is

displayed. The position where the red and

green lines overlap for the sets to join will be

the optimal point.

Make sure to set the correction width for the

sets to join as the same value. Optimal joining

is not possible with the sets with different

correction widths.

The optimal point is the point where this line overlaps.

Green line

Red line

9) Press



to select [BRIGHT ADJUST].

10)

Press the <ENTER> button.



The [BRIGHT ADJUST] screen is displayed.



When [AUTO TESTPATTERN] in the [EDGE

BLENDING] screen is set to [ON], completely

black test patterns will appear when the

[BRIGHT ADJUST] screen is displayed.

11)

Press



to select [BRIGHT INSIDE].

12)

Press the <ENTER> button.



The [BRIGHT INSIDE] individual adjustment

screen is displayed.



When [INTERLOCKED] is set to [OFF], [RED],

[GREEN], and [BLUE] can be adjusted.

13)

Press



to select an item, and

press

󱚣󱚤

to adjust the setting.



Once the adjustment is completed, press the

<MENU> button to return to the [BRIGHT

ADJUST] screen.

14)

Press



to select [UPPER],

[LOWER], [LEFT], or [RIGHT] in

[OUTSIDE AREA].

15)

Press

󱚣󱚤

to set the region (width) of

the [BRIGHT INSIDE] adjustment.

16)

Press



to select [BRIGHT

OUTSIDE].

17)

Press the <ENTER> button.



The [BRIGHT OUTSIDE] individual adjustment

screen is displayed.



When [INTERLOCKED] is set to [OFF], [RED],

[GREEN], and [BLUE] can be adjusted.

18)

Press



to select an item, and

press

󱚣󱚤

to adjust the setting.

[OUTSIDE AREA] (Right)

Projection range

Edge blending [WIDTH] (Right)

[MARKER] (Red)

Edge blending [START]

(Right)

[MARKER] (Green))

[BRIGHT OUTSIDE]

[BRIGHT INSIDE]

Note

The [BRIGHT ADJUST] function makes it harder

to notice the black level of the part of the image

overlapping getting brighter when multiple screens

are set using [EDGE BLENDING]. The optimal

point of the correction is set by adjusting [BRIGHT

INSIDE] so the black level of the overlapping image

area will be the same level as the non-overlapping

area.

If the bordering part of the part where the image

is overlapping and the non-overlapping part gets

brighter after adjusting [BRIGHT INSIDE], adjust

the width of the top, bottom, left, or right. Adjust

[BRIGHT OUTSIDE] when the width adjustment

makes only the border area darker.

The joining part may look discontinuous depending

on the position you are looking from when a screen

with high gain or rear screen is used.

When horizontal and vertical edge blending are

used simultaneously, adjust [BRIGHT BLENDING]

before the Step 11) adjustment.

To use either horizontal or vertical edge blending

only, set all values of [BRIGHT BLENDING] to 0.

The [AUTO TESTPATTERN] settings change in

conjunction with the [AUTO TESTPATTERN] in

[COLOR MATCHING].

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic PT-DZ21KE Seite 79

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic PT-DZ21KE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info