Bedienungsanleitung Panasonic PT-DZ21KE (Seite 92 von 179) (Englisch)

511534

Zoom out

Zoom in

Vorherige Seite

1/179

Nächste Seite

[DISPLAY OPTION] menu

92 - ENGLISH

Settings

[RGB IN]

(supported during RGB

signal input only)

Set to match the signal to input to the <RGB 1 IN>

terminal.

1) Press



to select [RGB IN].

2) Press the <ENTER> button.



The [RGB IN] screen is displayed.

3) Press



to select an item.

■

To set [RGB1 INPUT SETTING]

4) Select [RGB1 INPUT SETTING] in Step 3).

5) Press

󱚣󱚤

to switch [RGB1 INPUT

SETTING].



The setting will change as follows each time

you press the button.

[RGB/YP

] [Y/C]

[RGB/YP

]

Select when inputting an RGB signal

to the <RGB 1 IN> terminal.

[Y/C]

Select when inputting a luminance

signal and color signal to the <RGB

1 IN> terminal.

■

To switch the slice level of an

input sync signal

4) Select [RGB1 SYNC SLICE LEVEL] or

[RGB2 SYNC SLICE LEVEL] in Step 3).

5) Press

󱚣󱚤

to switch the [RGB1 SYNC

SLICE LEVEL] or the [RGB2 SYNC

SLICE LEVEL].



The setting will change as follows each time

you press the button.

[LOW] [HIGH]

[LOW] Set the slice level to [LOW].

[HIGH] Set the slice level to [HIGH].

[DVI-D IN]

Switch the setting when the external equipment is

connected to the <DVI-D IN> terminal of the projector

and the image is not projected correctly.

1) Press



to select [DVI-D IN].

2) Press the <ENTER> button.



The [DVI-D IN] screen is displayed.

3) Press



to select [DVI EDID].

4) Press

󱚣󱚤

to switch [DVI EDID].



The setting will change as follows each time

you press the button.

[EDID3] [EDID1] [EDID2:PC]

[EDID3]

Switch between ne settings for a

moving image and for a still image.

[EDID1]

Select mainly when an external

device that outputs movie-type

image signals (such as a blu-ray

disk player) is connected to the

<DVI-D IN> terminal.

[EDID2:PC]

Select mainly when an external

device that outputs still image-

type signals (such as a computer)

is connected to the <DVI-D IN>

terminal.

5) Press



to select [DVI SIGNAL

LEVEL].

6) Press

󱚣󱚤

to switch [DVI SIGNAL

LEVEL].



The setting will change as follows each time

you press the button.

[0-255:PC] [16-235]

[0-255:PC]

Select when an external device

(such as a computer) is connected

via DVI-D terminal output.

[16-235]

Select when an external device

(such as a blu-ray disc player)

is connected via HDMI terminal

output by use of a conversion cable

or similar cable.

Note

The optimal setting is different depending on the

output setting of the connected external equipment.

Refer to the instruction manual of the external

equipment regarding the output of the external

equipment.

The data for Plug and play will change when the

setting is changed. Refer to “List of compatible

signals” (



page 167) for a resolution that supports

plug and play.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic PT-DZ21KE Seite 92

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic PT-DZ21KE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info