Bedienungsanleitung Panasonic PT-DZ6710E (Seite 6 von 42) (Englisch)

598932

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

Important

Information

ENGLISH - 6

Precautions with regard to safety

If you notice smoke, strange smells or noise coming

from the projector, disconnect the mains plug from

the mains socket.

 Do not continue to use the projector in such cases,

otherwise fire or electric shocks could result.

 Check that no more smoke is coming out, and then

contact an Authorised Service Centre for repairs.

 Do not attempt to repair the projector yourself, as this

can be dangerous.

Do not install this projector in a place which is not

strong enough to take the full weight of the

projector.

 If the installation location is not strong enough, it may

fall down or tip over, and severe injury or damage

could result.

Installation work (such as ceiling suspension)

should only be carried out by a qualified technician.

 If installation is not carried out correctly, there is the

danger that injury or electric shocks may occur.

 Do not use other than an authorised ceiling mount

bracket.

If foreign objects or water get inside the projector, or

if the projector is dropped or the cabinet is broken,

disconnect the mains plug from the mains socket.

 Continued use of the projector in this condition may

result in fire or electric shocks.

 Contact an Authorised Service Centre for repairs.

The mains socket shall be installed near the

equipment and shall be easily accessible.

 Unplug the mains plug from the mains socket

immediately when problem occurred.

Do not overload the mains socket.

 If the power supply is overloaded (for example, by

using too many adapters), overheating may occur

and fire may result.

Never attempt to modify or disassemble the

projector.

 High voltages can cause fire or electric shocks.

 For any inspection, adjustment and repair work,

please contact an Authorised Service Centre.

Clean the mains plug regularly to prevent it from

becoming covered in dust.

 If dust builds up on the mains plug, the resulting

humidity can damage the insulation, which could

result in fire. Pull the mains plug out from the mains

socket and wipe it with a dry cloth.

 If not using the projector for an extended period of

time, pull the mains plug out from the mains socket.

Do not handle the mains plug with wet hands.

 Failure to observe this may result in electric shocks.

Insert the mains plug securely into the mains socket.

 Do not use other than the provided mains lead.

 If the plug is not inserted correctly, electric shocks or

overheating could result.

 Do not use plugs which are damaged or mains

sockets which are coming loose from the wall.

Do not place the projector on top of surfaces which

are unstable.

 If the projector is placed on top of a surface which is

sloped or unstable, it may fall down or tip over, and

injury or damage could result.

Do not place the projector into water or let it become

wet.

 Failure to observe this may result in fire or electric

shocks.

Do not do anything that might damage the mains

lead or the mains plug.

 Do not damage the mains lead, make any

modifications to it, place it near any hot objects, bend

it excessively, twist it, pull it, place heavy objects on

top of it or wrap it into a bundle.

 If the mains lead is used while damaged, electric

shocks, short-circuits or fire may result.

 Ask an Authorised Service Centre to carry out any

repairs to the mains lead that might be necessary.

Do not place the projector on soft materials such as

carpets or sponge mats.

 Doing so may cause the projector to overheat, which

can cause burns, fire or damage to the projector.

Do not place liquid containers on top of the

projector.

 If water spills onto the projector or gets inside it, fire

or electric shocks could result.

 If any water gets inside the projector, contact an

Authorised Service Centre.

Do not insert any foreign objects into the projector.

 Do not insert any metal objects or flammable objects

into the projector or drop them onto the projector, as

doing so can result in fire or electric shocks.

Do not allow the + and - terminals of the batteries to

come into contact with metallic objects such as

necklaces or hairpins.

 Failure to observe this may cause the batteries to

leak, overheat, explode or catch fire.

 Store the batteries in a plastic bag and keep them

away from metallic objects.

WARNINGS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic PT-DZ6710E Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic PT-DZ6710E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info