Bedienungsanleitung Panasonic PT-DZ6710E (Seite 9 von 42) (Englisch)

598932

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

Precautions with regard to safety

ENGLISH - 9

Important

Information

Do not reach for the openings beside the optical

lens, during horizontal or vertical movements of the

lens.

 Failure to observe this may cause injury.

Replacement of the lamp unit should only be carried

out after it has completely cooled off.

 Failure to observe this may cause burns.

We are constantly making efforts to preserve and maintain a clean environment. Please take non repairable

units back to your dealer or a recycling company.

Do not subject the projector to excessive vibration

or shocks.

 The projector lens need to be handled with care.

 Cover the lens with the lens cover when transporting

the projector.

When transporting the projector, hold the body at

the bottom securely.

 Do not hold the adjuster legs or the top cover to move

the projector, as this may damage the projector.

Be sure to always remove the lens during transport.

 The projection lens is susceptible to vibrations and

impacts.

Avoid setting up in places which are subject to

vibration or shocks.

 The internal parts can be damaged, which may cause

malfunctions or accidents.

Avoid setting up in places which are subject to

sudden temperature changes, such as near an air

conditioner or lighting equipment.

 The life of the lamp may be shortened or the projector

may be turned off. See “TEMP indicator” on page 28.

Do not set up the projector near high-voltage power

lines or near motors.

 The projector may be subject to electromagnetic

interference.

If installing the projector to the ceiling, ask a

qualified technician to carry out all installation work.

 You will need to purchase the separate installation kit

(Model No. ET-PKD56H, ET-PKD55S). Furthermore,

all installation work is should only be carried out by a

qualified technician.

If using this projector at high elevations 1 400 -

2 700 m (4 593 - 8 858 ft) sea level, set the HIGH

ALTITUDE MODE to ON.

 Failure to observe this may result in malfunctions or

the life of the lamp or the other components may be

shortened.

Be sure to install the projection lens cover after

installing the projection lens.

 If this not done, dust will collect inside the projector

and problems with the projector will result.

In order to get the best picture quality

 Draw curtains or blinds over any windows and turn off

any lights near the screen to prevent outside light or

light from indoor lamps from shining onto the screen.

 In rare cases, wafture can occur on the screen

affected by the warm air from the exhaust port

depending on the environment. Make sure that there

is no equipment in front of the set which will

recirculate the exhaust air from the set or other

nearby equipment.

Do not touch the surfaces of the lens or the front

glass with your bare hands.

 If the surface of the lens becomes dirty from

fingerprints or anything else, this will be magnified

and projected onto the screen. Moreover, when not

using the projector, close the front panel cover.

Cautions when transporting

Cautions when installing

Cautions on use

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic PT-DZ6710E Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic PT-DZ6710E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info