Bedienungsanleitung Panasonic PT-DZ6710E (Seite 33 von 42) (Englisch)

598932

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

ENGLISH - 33

Maintenance

Troubleshooting

Should any problem persist, contact your dealer.

Problem Cause

Reference

page

*1. CD-ROM: See the functional instructions in the provided CD-ROM.

Power does not turn on.

The mains lead may not be connected.

The POWER switch is turned off.

No electric supply is at the mains socket.

TEMP indicator is lit or flashes.

LAMP1/LAMP2 indicator is lit or flashes.

The lamp unit cover has not been securely installed.

The circuit breakers have tripped.

No picture appears.

The video signal input source may not be connected to a terminal

properly.

The input selection setting may not be correct.

The BRIGHTNESS adjustment setting may be at the minimum setting.

The input source which is connected to the projector may have a

problem.

The shutter function may be in use.

The ACF unit may not have been set correctly.

CD-ROM

The picture is fuzzy.

The lens focus may not have been set correctly.

The projector may not be at the correct distance from the screen.

The lens may be dirty.

The projector may be tilted too much.

CD-ROM

The colour is pale or

greyish.

COLOR or TINT adjustment may be incorrect.

The input source which is connected to the projector may not be

adjusted correctly.

RGB cable is damaged.

CD-ROM

The control buttons of the

projector do not operate.

CONTROL PANEL of CONTROL DEVICE SETUP in SECURITY

menu is disabled. If you have a loss of the remote control while the

CONTROL PANEL is disabled, press and hold the MENU button for

2 seconds with pressing the ENTER button.

CD-ROM

The remote control does

not operate.

REMOTE CONTROLLER of CONTROL DEVICE SETUP in

SECURITY menu is disabled.

The batteries may be weak.

The batteries may not have been inserted correctly.

The remote control signal receptor on the projector may be

obstructed.

The remote control unit may be out of the operation range.

Strong light such as fluorescent shine onto the signal receptor.

The remote control ID setting is incorrect.

CD-ROM

On screen menu does not

appear.

ON SCREEN button on the remote control may have been pressed

and cleared.

The picture does not

display correctly.

The colour format may not have been set correctly.

There may be a problem with the VCR or other signal source.

A signal which is not compatible with the projector is being input.

CD-ROM

Picture from a computer

does not appear.

The cable may be longer than the optional cable.

The external video output from a laptop computer may not be correct.

(You may be able to change the external output settings by pressing

the [Fn] + [F3] or [Fn] + [F10] keys simultaneously. The actual method

varies depending on the type of computer; refer to the documentation

provided with your computer for further details.)

Picture from a computer

DVI-D graphic board does

not appear.

The graphic board driver of the computer needs to be updated to the

latest version.

DVI-D IN setting in DISPLAY OPTION menu may be incorrect setting.

The computer may need to be restarted after switching DVI-D IN

setting in DISPLAY OPTION menu of the projector correctly.

CD-ROM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic PT-DZ6710E Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic PT-DZ6710E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info