Bedienungsanleitung Panasonic PT-EW530EL (Seite 68 von 118) (Englisch)

511546

Zoom out

Zoom in

Vorherige Seite

1/118

Nächste Seite

Setting

- ENGLISH

Settings

Execute

Press ▲▼ to select one among the 1 )

items as below and then press the

<ENTER> button.

Start

It executes the count up or count

down function.*

Reset

Reset the P-timer values.*

Exit

To exit the P-timer operation.

Press the <ENTER> button at Start and the *1 :

indication changes into Stop. To stop Count up or

Count down, press the <ENTER> button at Stop

on the screen menu, then the indication changes

into Restart. Press the <ENTER> button at

Restart to resume Count up or Count down.

Press the <ENTER> button at Reset to return to *2 :

the following value:

Count up

"000:00"

Count down

Timer that you set

Attention

To stop the [P-timer] function, press the <P-TIMER>

button.

To cancel the [P-timer], press and hold the <P-TIMER>

button for a few seconds.

Security

This function allows you to use the [Key lock] and [PIN

code lock] function to set the security for the projector

operation.

Press ▲▼ to select [Security].1 )

Press ► or the <ENTER> button to 2 )

access the submenu.

Key lock

This function locks the side control and remote control

buttons to prevent operation by unauthorized persons.

Press ▲▼ to select the desired items 1 )

as below.

Unlocked.

Lock the operation of the side

control. To unlock, use the remote

control.

Lock the operation of the remote

control. To unlock, use the side

control.

PIN code lock

This function prevents the projector from being

operated by unauthorized persons and provides the

following setting options for security.

Press ▲▼ to select the desired items 1 )

as below.

Off

Unlocked.

On 1

Enter the PIN code every time

turning on the projector.

On 2

Enter the PIN code to operate

the projector once the power cord

is disconnected; as long as the

AC power cord is connected, the

projector can be operated without

a PIN code.

Attention

Whenever you change the PIN code lock setting or the

PIN code (the four-digit number), you are required to

enter the PIN code. The "1234" is set as the initial PIN

code at the factory.

PIN code change

The PIN code can be changed to your desired four-

digit number.

Press ▲▼ to select [PIN code change] 1 )

and then press <ENTER> button.

Current Pin code dialog box appears.

Press ▲▼ to enter the current code. 2 )

Press ► button to x the number and

move the red frame pointer to the next

box.

The New PIN code input dialog box appears.

Repeat these steps to set a new PIN 3 )

code.

Shutter

Shutter function is available to block out light to the

screen, so that the screen can be used for the other

presenters.

Press ▲▼ to select [Shutter1 )

Press ► or the <ENTER> button to 2 )

access the submenu.

* (Only for EZ570 series, EW630 series and EX600

series.)

Protection

Prohibit the shutter operation from the remote control

and the projector's side control.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic PT-EW530EL Seite 68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic PT-EW530EL

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info