Bedienungsanleitung Panasonic PT-EX500E (Seite 66 von 118) (Englisch)

511543

Zoom out

Zoom in

Vorherige Seite

1/118

Nächste Seite

Setting

- ENGLISH

Settings

Simple mode

This function decides whether to activate the simple

mode.

Press ▲▼ to select [Simple mode] and 1 )

then press the <ENTER> button.

Press ▲▼ to switch between [On] and 2 )

[Off].

Only the simple mode buttons

are active.

Off

Simple mode function is off.

Note

Warning icon and

[Simple mode : On] message

appear on the screen for about 4 seconds when

press the button which is not the simple mode

button.

Remote control

This switching function prevents remote control

interference when operating several projectors or

video equipment at the same time.

Press ▲▼ to select [Remote control].1 )

Press the <ENTER> button.2 )

Press ▲▼ to select one among the 3 )

sixty and ve codes.

This projector provides 65 different remote

control codes: [All], [Code 01]~[Code 64].

Note

When operating the projector under [All] code, you can

operate several projectors at the same time. If you want

to operate the projector independently, you must switch

to other code.

When different codes are set on the projector and on the

remote control, any operation cannot be made. In that

case, switch the code on the remote control to t the

code on the projector.

RC sensor

Select a location of the infrared remote receiver of the

remote control.

Press ▲▼ to select [RC sensor].1 )

Press ► or the <ENTER> button.2 )

Press ▲▼ to select one among 3 )

options as below.

All

Activate all of the receivers.

Front &

Top

Activate both the front and top

receivers.

Top &

Back

Activate both the top and back

receivers.

Front &

Back

Activate both the front and back

receivers.

Front

Activate only the front receiver.

Top

Activate only the top receiver.

Back

Activate only the back receiver.

Eco management

Can optimize lamp power and reduce the power

consumption according to the application.

Press ▲▼ to select [Eco 1 )

management].

Press ► or the <ENTER> button.2 )

Auto power save

Press ▲▼ to select [Auto power save] 1 )

and press the <ENTER>button.

Press ▲▼ to choose [On] between 2 )

[On] and [Off].

Press ▲▼ to select auto power save 3 )

conditions.

Ambient light

detection

Adjusts the lamp power according

to the ambient brightness.

Signal

detection

Drops the lamp power when no

signal is input.

AV mute

detection

Drops the lamp power in the AV

mute mode.

This function is only for EW530 series and *1 :

EX500 series.

Note

When [Auto power save] is [Off], [Ambient light

detection], [Signal detection] and [AV mute detection] are

not available.

Only these buttons are active

when the simple mode is set to

[On]. [POWER ON, STANDBY,

SHUTTER (AV MUTE), INPUT,

MENU, AUTO PC ADJ, ▲, ▼

(MUTE), ◄ (VOLUME-), ►

(VOLUME+), ENTER, IMAGE

SELECT, IMAGE ADJUST,

P-TIMER, ECO, SCREEN, P IN

P, ON /OFF]. Number buttons

also become active only when

setting the remote control codes

numbers or entering the PIN

code numbers.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic PT-EX500E Seite 66

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic PT-EX500E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info