Bedienungsanleitung Panasonic PT-EX500E (Seite 70 von 118) (Englisch)

511543

Zoom out

Zoom in

Vorherige Seite

1/118

Nächste Seite

Setting

- ENGLISH

Settings

Filter counter

This function is used to set the frequency of cleaning

or replacing the lter unit.

Press ▲▼ to select [Filter counter].1 )

Press ► or the <ENTER> button to 2 )

access the submenu items.

Filter counter

Show the total accumulated time of the lter use timer

setting.

Filter counter remaining

The remaining time for the lter counter is displayed

in units of 10%.

This is displayed in red when the remaining time is 10%.

Filter counter timer

To set a timer. When the projector reaches the

selected time the lter warning icon appears on the

screen.

Press ▲▼ to select [Filter counter 1 )

timer] and then press the <ENTER>

button.

Press ▲▼ to set the timer. 2 )

Select from [Off/1000 H/2000 H/3000 H/

4000 H/6000 H/8000 H/9000 H/12000 H]

depending on the use environment.

The situation which different icons appear as

below shown:

When the remaining time is less

than

10%

When the remaining time is 0, the

lter replacement is necessary.

When the projector reaches a time

set by user in the timer setting.

Attention

[Filter counter remaining] disappears,

will be

displayed. appeared about 10 hours later, and

powered on the projector about 3 minutes later, the

projector will power off automatically and enter the

standby mode in order to protect the inner parts of the

projector. When is displayed, please clean or replace

the air lter units as soon as possible and then reset the

[Filter counter].

Filter counter reset

After cleaning or replacing the lter unit, be sure to

reset the timer.

Press ▲▼ to select [Filter counter 1 )

reset].

Press the <ENTER> button. 2 )

[Filter counter Reset?] appears. Select [Yes]

to continue. Another conrmation dialog

box appears, select [Yes] to reset the [Filter

counter].

Test pattern

Results of adjustment of the position , size and other

factors are not reected in test patterns. Ensure the

input signal is displayed before performing various

kinds of setting.

Press ▲▼ to select [Test pattern].1 )

Press ► or the <ENTER> button to 2 )

access the submenu items.

Press ▲▼ to go backwards and 3 )

forwards between test patterns as

below.

[Color], [Gradation 1], [Gradation 2],

[Gradation 3], [Gradation 4], [All white], [All

black] and [Cross].

Note

Even while the test pattern is displayed, the zoom,

focus, lens shift, shutter, and power off functions

take priority.

Factory default

This function returns all setting values except for [PIN

code lock], [Logo PIN code lock] and [Filter counter]

to the factory default settings.

Press ▲▼ to select [Factory default].1 )

Press the <ENTER> button.2 )

[Return to Factory default?] appears. Select

[Yes] to continue. Another conrmation dialog

box appears, select [Yes] to return to [Factory

default].

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic PT-EX500E Seite 70

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic PT-EX500E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info