537859
25
Zoom out
Zoom in
Vorherige Seite
1/59
Nächste Seite
Basic operations
ENGLISH
25
Remote control operation
You can freeze the projected image and temporarily
stop the sound, regardless of the playing condition of
the connected device.
FREEZE
Press the button again to cancel it.
The image is distorted momentarily
when the projection is stopped and
restarted.
STOP THE PROJECTION
TEMPORARILY
You can temporarily stop the projection and the sound
from the projector.
AV
MUTE
Press the button again to cancel it.
SWITCH THE INPUT SIGNAL
You can switch the input signal to be projected.
COMPUTER
COMPUTER
The options below are displayed
each time you press this button.
COMPUTER1 Signal input to COMPUTER1 IN
terminal
COMPUTER2 Signal input to COMPUTER2 IN
terminal
VIDEO
VIDEO
The options below are displayed each
time you press this button.
S-VIDEO Signal input to S-VIDEO IN terminal
VIDEO Signal input to VIDEO IN terminal
CAPTURE AN IMAGE
Youcanconrmtheselectedinputterminal(fromthe
graphical input terminal guide on the upper right of the
screen), if INPUT GUIDE (DISPLAY OPTION
ON-SCREEN DISPLAY menu) is set to DETAILED.
(
page 35)
You can change the input with [

].
It may take some time to change the image after the
input signal is switched.
NOTE:
Input a compatible signal shown in the “LIST OF •
COMPATIBLE SIGNALS”. (
page 52)
For the input terminals, • see “Connections”. (
page 18)
The input guide automatically disappears when it is left •
idle.
Press [INPUT SELECT] on the control panel to switch the
input in the following order. (
page 13)
COMPUTER1 COMPUTER2
VIDEO S-VIDEO
AUTO
SETUP
FREEZE
AV
MUTE
COMPUTER
VIDEO
DEFAULT
FUNCTION
WIN.
INDEX-
DIGITAL ZOOM
VOLUME
SET UP THE IMAGE POSITION
AUTOMATICALLY
The projector automatically adjusts the SHIFT, DOT
CLOCK and CLOCK PHASE when an RGB signal is
input.
AUTO
SETUP
NOTE:
The • SIGNAL SEARCH will be in operation when it is set to
ON. (
page 37)
If the dot clock frequency is higher than 162 MHz, •
DOT
CLOCK and CLOCK PHASE can not be adjusted
automatically. (
page 32, 33)
If the projected signal or image is too dark or blurred around •
the edge, AUTO SETUP may stop the process before
completing the adjustment or adjust abnormally. Project a
much clearer or lighter image and try again.
Projected imageScreen
25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic PT-LB3E wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info