Bedienungsanleitung Panasonic PT-LW25HE (Seite 53 von 76) (Englisch)

511577

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Setting

ENGLISH -

Settings

Note

When selecting [Network], the cooling fans may be

running depending on the temperature inside the

projector even if the projector is turned off.

Refer to "Operating Instructions - Network Operations

If [Standby mode] is set to [Eco], you cannot use network

functions when the projector is standing by. Also, you

cannot use some RS-232C protocol commands.

If set to [Network], you can use network functions when

the projector is standing by.

P-timer

This function allows you to change the setting of the

[P-timer] and execute it.

Press ▲▼ to select [P-timer].1 )

Press ► or <SELECT> button to 2 )

access the submenu.

Mode

Press ▲▼ button to select one mode 1 )

among the items as below.

Count up

The [P-timer] display 000:00

appears on the screen and the

count up starts (000:00-180:00).

Count down

The time set in the [Timer] setting

appears on the screen and the

countdown starts.

Timer

Press ▲▼ to select [Timer] and then 1 )

press the <SELECT> button.

Press▲▼ to set the [Timer](1-180 Min).2 )

Timer is available in [Count down] only. Factory

default value is 10 Min.

Execute

Press ▲▼ to select one among the 1 )

items as below and then press the

<SELECT> button.

Start

It executes the [count up] or [count

down] function.*

Reset

Reset the P-timer values.*

Exit

To exit the P-timer operation.

Press the <SELECT> button at [Start] and the *1 :

indication changes into [Stop]. To stop [Count up]

or [Count down], press the <SELECT> button at

[Stop] on the [screen] menu, then the indication

changes into [Restart]. Press the <SELECT>

button at [Restart] to resume [Count up] or [Count

down].

Press the <SELECT> button at [Reset] to return *2 :

to the following value:

Count up

"000:00"

Count down

Timer that you set

Attention

To stop the [P-timer] function, press the <P-TIMER>

button.

To cancel the [P-timer], press and hold the <P-TIMER>

button for a few seconds.

Closed caption

[

Only for [NTSC], [480i] input

]

Press ▲▼ to select [Closed caption].1 )

Press ► or the <SELECT> button to 2 )

enter the submenu.

Closed caption

Press ▲▼ to select [Closed caption] 1 )

and then press the <SELECT> button.

Press ▲▼ to select [Off], [CC1], [CC2], 2 )

[CC3] or [CC4].

Color

Press ▲▼ to select [Color] and then 1 )

press the <SELECT> button.

Press▲▼ to select color or white.2 )

Attention

The closed caption is mainly used in the north America.

This function shows the text information contained in the

image signal. Captions may not be displayed on some

devices or software.

You can select [Closed caption] when [NTSC] or [480i]

signals are input.

Part of characters may not displayed when high

compensation valued are set in [Keystone].

Closed captions are not displayed while the menu screen

appears.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic PT-LW25HE Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic PT-LW25HE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info