Bedienungsanleitung Panasonic PT-LX26HE (Seite 52 von 76) (Englisch)

511578

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Setting

- ENGLISH

Settings

Logo PIN code change

Logo PIN code can be changed to your desired four-

digit number.

Press ▲▼ to select [Logo PIN code 1 )

change].

Press the <SELECT> button.2 )

Current logo PIN code dialog box appears.

Press ▲▼ to enter the current code.3 )

The New Logo PIN code input dialog box

appears. Set a new [Logo PIN code], a

conrmation box appears, choose [Yes] to set

the new [Logo PIN code].

Attention

Be sure to note the new [Logo PIN code] and keep it on

hand. If you lost the number, you could no longer change

the Logo PIN code setting.

Terminal

The [COMPUTER IN 2/MONITOR OUT] terminal on

the back of the projector is switchable for computer 2

input or monitor output.

Press ▲▼ to select [Terminal] and 1 )

then press the <SELECT> button.

Press ▲▼ to switch the item.2 )

Computer 2

Computer input

Monitor out

Attention

[Terminal] function is not available when selecting

[Computer 2] to the input source. Change the input

source to the others (Computer 1 or Video) so that the

[Terminal] function will be available.

Power management

For reducing power consumption as well as

maintaining the lamp life, the [Power management]

function turns off the projection lamp when the

projector is not operated for a certain period.

Press ▲▼ to select [Power 1 )

management].

Press ► or the <SELECT> button to 2 )

access the submenu.

Mode

Press ▲▼ and then press the 1 )

<SELECT> button to select one mode

among the items as below.

Ready

When the lamp has been fully cooled

down, the <STANDBY(R)/ON(G)>

indicator changes to green blinking.

In this condition, the projection lamp

will be turned on if the input signal

is reconnected or any button on the

control panel or remote control is

pressed.

Shut

down

When the lamp has been fully cooled

down, the power will be turned off.

Off

[Power management] function is off.

Timer

Press ▲▼ to select [Timer] and then 1 )

press the <SELECT> button.

Press ▲▼ to set the Timer(1~30min).2 )

Direct on

Press ▲▼ to select [Direct on] and 1 )

then press the <SELECT> button.

Press ▲▼ to switch between [On] and 2 )

[Off ].

When this function is set to [On], the projector

will be automatically turned on just by

connecting the AC power cord to a wall outlet.

Be sure to turn off the projector properly. If the

projector is turned off in the incorrect sequence,

the [Direct On] function does not work properly.

Standby mode

This function can set the electric power when the

projector is standing by.

Press ▲▼ to select [Standby mode] 1 )

and then press the <SELECT> button.

Press ▲▼ to switch between the items 2 )

as below.

Eco

Restricts some functions in

standby mode to reduce power

consumption.

Network

Does not restrict functionality

even in standby mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic PT-LX26HE Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic PT-LX26HE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info