Bedienungsanleitung Panasonic PT-RW430 (Seite 18 von 138) (Englisch)

544150

Zoom out

Zoom in

Vorherige Seite

1/138

Nächste Seite

Chapter 1 Preparation — Precautions for use

18 - ENGLISH

f Change your password periodically.

f Panasonic Corporation or its afliate companies will never ask for your password directly. Do not divulge your password in

case you receive such inquiries.

f The connecting network must be secured by a rewall, etc.

f Set a password for the web control and restrict the users who can log in.

DIGITAL LINK

“DIGITAL LINK” is a technology that uses a twisted-pair-cable to transmit video, audio, Ethernet, and serial control signals.

The projector supports the optional digital interface box (Model No.: ET-YFB100G), and the “XTP transmitter” of Extron

Electronics. For twisted-pair-cable transmitter of other manufacturers of which the operation has been veried with the

DIGITAL LINK compatible projector, refer to Panasonic website (http://panasonic.net/avc/projector/). Note that the verication

for devices of other manufacturers has been made for the items set by Panasonic Corporation, and not all the operations have

been veried. For operation or performance problems caused by the devices of other manufacturers, contact the respective

manufacturers.

Disposal

To dispose of the product, ask your local authorities or dealer for correct methods of disposal.

Cautions on use

rTo get a good picture quality

f In order to view a beautiful image in higher contrast, prepare an appropriate environment. Draw curtains or blinds over

windows and turn off any lights near the screen to prevent outside light or light from indoor lamps from shining onto the

screen.

f The high clarity projection lens is thermally affected by the light from the light source, making the focus unstable in the period

just after switching on the power. The focus stabilizes when an image is projected continuously for 30 minutes or more.

rDo not touch the surface of the projection lens with your bare hands.

If the surface of the projection lens becomes dirty from ngerprints or anything else, this will be magnied and projected onto

the screen.

rDLP chips

f The DLP chips are precision-made. Note that in rare cases, pixels of high precision could be missing or always lit. Note that

such phenomena does not indicate malfunction.

f Directing a high-power laser beam onto the lens surface can damage the DLP chips.

rLight source

The light source of the projector uses LED and lasers, and has the following characteristics.

f The luminance of the light source will decrease by duration of usage.

The usage time until when the luminance of the light source decreases by half is approximately 20 000 hours. 20 000 hours

is the estimated duration, and it varies depending on individual differences and usage conditions.

If the light source goes off or the brightness reduces noticeably, ask your dealer about replacement of the light source unit.

rComputer and external device connections

f When connecting a computer or an external device, use power cords and shielded cables following instructions in this

manual.

f When inputting digital signals to the DVI-I terminal, use a commercially available cable with a ferrite core.

rViewing 3D images

The projector can display 3D image signals that are input through various systems such as “frame packing” and “side by side”.

You need to prepare external devices for viewing 3D images (such as 3D eyewear, video signal output devices) which are

compatible with your 3D system. For connections of the projector and external devices, see the instruction manuals of external

devices you use. Connections vary depending on your 3D system.

Refer to “List of 3D compatible signals” (x page 132) for the types of 3D video signals that can be used with the projector.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic PT-RW430 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic PT-RW430

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info