Bedienungsanleitung Panasonic PT-RW430EW (Seite 41 von 138) (Englisch)

511568

Zoom out

Zoom in

Vorherige Seite

1/138

Nächste Seite

Chapter 3 Basic Operations — Operating with the remote control

ENGLISH - 41

Switching the input

The input for projection can be switched.

button

1) Press the input selection (<COMPUTER>, <DVI-I>, <VIDEO>, <DIGITAL LINK>, <HDMI>) buttons.

f This operation can be also performed using the <INPUT SELECT> button on the control panel.

<COMPUTER> Switch the input to COMPUTER.

<DVI-I> Switch the input to DVI-I.

<VIDEO> Switch the input to VIDEO.

<DIGITAL LINK> Switch the input to DIGITAL LINK.

<HDMI> Switch the input to HDMI.

Note

f When the optional digital interface box (Model No.: ET-YFB100G) is connected to the <DIGITAL LINK/LAN> terminal, the ET-YFB100G input

changes with each press of the <DIGITAL LINK> button.

For twisted-pair-cable transmitters of other manufacturers, switch the input on the projector to DIGITAL LINK, and then switch the input on

the twisted-pair-cable transmitter.

Using the Automatic setup function

The automatic setup function can be used to automatically adjust the resolution, clock phase, and image position when analog RGB signals

consisting of bitmap images such as computer signals are being input, or to automatically adjust the image position when DVI-D/HDMI signals

are input. Supplying images with bright white borders at the edges and high-contrast black and white characters is recommended when the

system is in automatic adjustment mode.

Avoid supplying images that include halftones or gradation, such as photographs and computer graphics.

button

1) Press the <AUTO SETUP> button.

f [COMPLETE] is displayed when it has completed without any problem.

Note

f The clock phase may shift even if it has completed without any incident. In such cases, adjust the [POSITION] menu → [CLOCK PHASE]

(x page 56).

f If an image with blurred edges or a dark image is input, [INCOMPLETE] may appear or adjustment may not be performed properly even

when [COMPLETE] appears. In this case, adjust the settings in the [ADVANCED MENU] menu → [INPUT RESOLUTION] (x page 59),

[POSITION] → [CLOCK PHASE] (x page 56), and [SHIFT] (x page 54).

f Adjust special signals according to the [DISPLAY OPTION] menu → [AUTO SETUP] (x page 69).

f Automatic adjustment may not work depending on the model of the computer.

f Automatic adjustment may not work for a synchronization signal of C-SY or SYNC ON GREEN.

f Images may be disrupted for a few seconds during automatic adjustment, but it is not a malfunction.

f Adjustment is required for each input signal.

f Automatic adjustment can be canceled by pressing the <RETURN> or <MENU> button during the automatic adjustment operation.

f If the automatic setup function is used while moving images are being input, the adjustment may not be performed properly even for an RGB

signal that can use automatic setup. [INCOMPLETE] may appear, or adjustment may not be nished properly even if [COMPLETE] appears.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic PT-RW430EW Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic PT-RW430EW

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info