Bedienungsanleitung Panasonic PT-RZ12K (Seite 91 von 219) (Englisch)

598884

Zoom out

Zoom in

Vorherige Seite

1/219

Nächste Seite

Chapter 4 Settings — [POSITION] menu

ENGLISH - 91

[VID AUTO]

The projector identies the video ID (VID) embedded in the video signals and displays the image by

automatically switching the screen sizes between 4:3 and 16:9. This function is effective for NTSC

signals.

[AUTO]

The projector identies the video ID (VID) embedded in the video signals and displays the image by

automatically switching the screen sizes between 4:3 and 16:9. This function is effective for 480i/480p

signals.

[THROUGH] Displays images without changing the resolution of the input signals.

[16:9]

Displays images with the aspect ratio converted to 16:9 when standard signals are input

. When

wide-screen signals are input

, the images are displayed without changing the aspect ratio.

[4:3]

Displays images without changing the aspect ratio when standard signals are input

. When wide-

screen signals are input

, and [4:3] is selected in [SCREEN FORMAT], the images are displayed by

converting the aspect ratio to 4:3. When anything other than [4:3] is selected in [SCREEN FORMAT],

the images are reduced to be displayed without changing input aspect ratio so that the images will t

in the 4:3 screen.

[H FIT]

Displays images using the entire width of the screen range selected in [SCREEN FORMAT]. When

signals have the aspect ratio vertically longer than the screen aspect ratio selected in [SCREEN

FORMAT], the images are displayed with the top and bottom parts cut off.

[V FIT]

Displays images using the entire height of the screen range selected in [SCREEN FORMAT]. When

signals have the aspect ratio horizontally longer than the aspect ratio of the screen selected in

[SCREEN FORMAT], the images are displayed with the right and left parts cut off.

[HV FIT]

Displays images in the entire screen range selected in [SCREEN FORMAT]. When the aspect ratio of

the input signals differs from that of the screen range, the images are displayed with the aspect ratio

converted to that of the screen selected in [SCREEN FORMAT].

*1 During video signals and Y/C signal (NTSC) input only

*2 During RGB signal (480i, 480p) input

*3 Standard signals are input signals with an aspect ratio of 4:3 or 5:4.

*4 Wide-screen signals are input signals with an aspect ratio of 16:10, 16:9, 15:9 or 15:10.

Note

f Some size modes are not available for certain types of input signals. [DEFAULT] cannot be selected for video signal, Y/C signal (NTSC), or

RGB (480i, 480p) signal.

f If an aspect ratio which is different from the aspect ratio for the input signals is selected, the images will appear differently from the originals.

Be careful of this when selecting the aspect ratio.

f If using the projector in places such as cafes or hotels to display programs for a commercial purpose or for public presentation, note that

adjusting the aspect ratio or using the zoom function to change the screen images may be an infringement of the rights of the original

copyright owner for that program under copyright protection laws. Take care when using a function of the projector such as the aspect ratio

adjustment and zoom function.

f If conventional (normal) 4:3 images which are not wide-screen images are displayed on a wide screen, the edges of the images may not

be visible or they may become distorted. Such images should be viewed as with an aspect ratio of 4:3 in the original format intended by the

creator of the images.

[ZOOM]

You can adjust the image size.

When [ASPECT] is set to other than [DEFAULT] and [THROUGH]

1) Press as to select [ZOOM].

2) Press the <ENTER> button.

f The [ZOOM] screen is displayed.

3) Press as to select [INTERLOCKED].

4) Press qw to switch the item.

[OFF] Sets the [VERTICAL] and [HORIZONTAL] zoom ratio.

[ON]

Uses [BOTH] to set zoom ratio. Image can be enlarged or reduced vertically and horizontally at the

same magnication.

5) Press as to select [VERTICAL] or [HORIZONTAL].

f If [ON] is selected, select [BOTH].

6) Press qw to adjust.

Note

f When [ASPECT] is set to [THROUGH], [ZOOM] cannot be adjusted.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic PT-RZ12K Seite 91

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic PT-RZ12K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info