Bedienungsanleitung Panasonic PT-V W330EA (Seite 54 von 82) (Englisch)

536680

Zoom out

Zoom in

Vorherige Seite

1/82

Nächste Seite

Setting

- ENGLISH

Settings

Logo PIN code change

Logo PIN code can be changed to your desired four-

digit number.

Press ▲▼ to select [Logo PIN code 1 )

change].

Press the <SELECT> button.2 )

Current logo PIN code dialog box appears.

Press ▲▼ to enter the current code.3 )

The New Logo PIN code input dialog box

appears. Set a new Logo PIN code, a

conrmation box appears, choose [Yes] to set

the new Logo PIN code.

Attention

Be sure to note the new Logo PIN code and keep it on

hand. If you lost the number, you could no longer change

the Logo PIN code setting.

HDMI setup

This function is only used for HDMI input source.

Press ▲▼ to select [HDMI setup].1 )

Press ► or the <SELECT> button.2 )

The names for the output setting of Digital R/G/

B vary from equipment to equipment.

Image

Normal

When the output of Digital R/G/B

equipment is set to Standard.

Enhanced

When the output of Digital R/G/B

equipment is set to Enhanced.

Sound

HDMI

When Digital input source is input,

Sound is set to HDMI.

Computer

When DVI input source is changed

to HDMI input source, Sound is set

to Computer 2.

Attention

For details, refer to the operating instructions of your

Digital R/G/B equipment.

Terminal

The COMPUTER IN 2/MONITOR OUT terminal on

the back of the projector is switchable for computer 2

input or monitor output.

Press ▲▼ to select [Terminal] and 1 )

then press the <SELECT> button.

Press ▲▼ to switch the item.2 )

Computer 2

Computer input

Monitor out

Note

Terminal function is not available when selecting

[Computer 2] to the input source. Change the input

source to the others (HDMI or Computer 1 or Video) so

that the Terminal function will be available.

P IN P (PT-VW330EA Only)

This function is used to project two images

simultaneously by placing a separate small sub

screen within or next to the main screen.

Press ▲▼ to select [P IN P].1 )

You can also press the <P IN P>button on the

remote control to display [P IN P] menu

Press ► or <SELECT> button to 2 )

access the submenu.

Only the sound from the source of Main picture

is valid, while the source of Sub picture cannot

output the sound.

Mode

Press ▲▼ to select [Mode] and then 1 )

press the <SELECT> button.

Press ▲▼ to select one mode among 2 )

the items as below.

P IN P

Provide the images of Main picture

and Sub picture at the ratio of

Screen aspect in the Screen Menu

Side by

Side

Provide the images of Main picture

and Sub picture at the ratio of 4:3.

Off

Turn off the P IN P function.

Attention

In [P IN P] the larger picture is main picture, and the

smaller one is sub picture; in [Side by side], the left

picture is main picture, and the right one is sub picture.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic PT-V W330EA Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic PT-V W330EA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info