Bedienungsanleitung Panasonic PT-VX500E (Seite 55 von 98) (Englisch)

511583

Zoom out

Zoom in

Vorherige Seite

1/98

Nächste Seite

ENGLISH -

Settings

Setting

PIN code lock

This function prevents the projector from being

operated by unauthorized persons and provides the

following setting options for security.

Press ▲▼ to select the desired items 1 )

as below.

Off Unlocked.

On 1

Enter the PIN code every time

turning on the projector.

On 2

Enter the PIN code to operate

the projector once the power cord

is disconnected; as long as the

AC power cord is connected, the

projector can be operated without

a PIN code.

Attention

Whenever you change the PIN code lock setting or the

PIN code (the four-digit number), you are required to

enter the PIN code. The "1234" is set as the initial PIN

code at the factory.

PIN code change

The PIN code can be changed to your desired four-

digit number.

Press ▲▼ to select [PIN code change] 1 )

and then Press <ENTER> button.

Current Pin code dialog box appears.

Press ▲▼ to enter the current code. 2 )

Press ► button to x the number and

move the red frame pointer to the next

box.

The New PIN code input dialog box appears.

Repeat these steps to set a new PIN 3 )

code.

Attention

Be sure to note the new PIN code and keep it on hand. If

you lost the number, you could no longer change the PIN

code setting.

Fan

Press ▲▼ to select [Fan] and then 1 )

Press <ENTER> button.

Press ▲▼ to select one option .2 )

This function provides the following options in

the cooling fans’ operation when the projector is

turned off.

L 1 Normal operation.

L 2

Slower and lower-sound than

the normal operation (L 1), but

it takes more time to cool the

projector down.

Fan control

Press ▲▼ to select [Fan control] and 1 )

then Press <ENTER> button.

Press ▲▼ to select one among 2 )

options as below.

Choose the running speed of cooling fans from

the following options according to the ground

elevation under which you use the projector.

Off Normal speed.*

On 1 Faster than [Off] mode.*

On 2 Faster than [On 1] mode.*

Set this function to [Off] when using the projector *1 :

in non-high altitude environment.

When using the projector in the elevation of *2 :

above 1 200 m and below 2 000 m, make sure

[Fan control] is set to [On 1].

When using the projector in the elevation of *3 :

above 2 000 m and below 2 700 m, make sure

[Fan control] is set to [On 2].

Note

Failure to set the running speed of cooling fans

properly may affect the projector life.

The fan noise becomes louder in [On 1] and [On 2].

Video delay control

This function allows you to make a digital processing

of a projected image faster.

Press ▲▼ to select [Video delay 1 )

control] and then Press the <ENTER>

button.

Press ▲▼ to select one item between 2 )

[On] and [Off].

Note

[Noise reduction] and [Progressive] can not be

selected when [Video delay control] function is set

to [On].

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic PT-VX500E Seite 55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic PT-VX500E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info