Bedienungsanleitung Panasonic RC-800 (Seite 1 von 2) (Englisch)

734657

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Panasonic Corporation

Web Site: http://www.panasonic.com

Manufactured by:

Panasonic Corporation

Kadoma, Osaka, Japan

Authorized Representative in Europe:

Panasonic Marketing Europe GmbH

Panasonic Testing Centre

Winsbergring 15, 22525 Hamburg, Germany

TQBJ2233

F0720TM0

2020/08/20

EG GN

Operating Instructions

FM Radio

Model No. RC-800

Thank you for purchasing this product.

Please read these instructions carefully before using this product, and save this

manual for future use.

Safety precautions

Unit

≥ To reduce the risk of fire, electric shock or

product damage,

– Do not expose this unit to rain, moisture,

dripping or splashing.

– Do not place objects filled with liquids,

such as vases, on this unit.

– Use the recommended accessories.

– Do not remove covers.

– Do not repair this unit by yourself. Refer

servicing to qualified service personnel.

AC adaptor

≥ To reduce the risk of fire, electric shock or

product damage,

– Insert the mains plug fully into the socket

outlet.

– Do not pull, bend, or place heavy items on

the lead.

– Do not handle the plug with wet hands.

– Hold onto the mains plug body when

disconnecting the plug.

– Do not use a damaged mains plug or

socket outlet.

≥ The mains plug is the disconnecting device.

Install this unit so that the mains plug can be

unplugged from the socket outlet

immediately.

Unit

≥

This unit may receive radio interference caused

by mobile telephones during use. If such

interference occurs, please increase separation

between this unit and the mobile telephone.

Avoid the use in the following conditions

≥ High or low extreme temperatures during

use, storage or transportation.

≥

Replacement of a battery with an incorrect type.

≥ Disposal of a battery into fire or a hot oven,

or mechanically crushing or cutting of a

battery, that can result in an explosion.

≥ Extremely high temperature and/or

extremely low air pressure that can result in

an explosion or the leakage of flammable

liquid or gas.

Battery

≥ Do not use rechargeable type batteries.

≥ Danger of explosion if battery is incorrectly

replaced. Replace only with the type

recommended by the manufacturer.

≥ Mishandling of batteries can cause

electrolyte leakage and may cause a fire.

– Remove the batteries if you do not intend

to use the unit for a long period of time or

if the unit is to be powered exclusively by

AC power. Store in a cool, dark place.

– Do not heat or expose to flame.

– Do not leave the battery(ies) in a car

exposed to direct sunlight for a long

period of time with doors and windows

closed.

– Do not take apart or short circuit.

– Do not recharge alkaline or manganese

batteries.

– Do not use batteries if the covering has

been peeled off.

≥ Do not mix old and new batteries.

≥ Do not use different types of batteries at the

same time.

≥ When disposing of the batteries, please

contact your local authorities or dealer and

ask for the correct method of disposal.

WARNING

CAUTION

[Safety_information_for_customers_in_the_EU]

Declaration of Conformity (DoC)

Hereby, “Panasonic Corporation” declares that this product is in compliance with the essential

requirements and other relevant provisions of Directive 2014/53/EU.

Customers can download a copy of the original DoC to our RE products from our DoC server:

http://www.ptc.panasonic.eu

Contact to Authorized Representative: Panasonic Marketing Europe GmbH,

Panasonic Testing Centre, Winsbergring 15, 22525 Hamburg, Germany

[For_Australia]

Disposal of Old Equipment

Only for European Union and countries with recycling systems

This symbol on the products, packaging, and/or accompanying

documents means that used electrical and electronic products must

not be mixed with general household waste.

For proper treatment, recovery and recycling of old products, please

take them to applicable collection points in accordance with your

national legislation.

By disposing of them correctly, you will help to save valuable

resources and prevent any potential negative effects on human health

and the environment.

For more information about collection and recycling, please contact

your local municipality.

Penalties may be applicable for incorrect disposal of this waste, in

accordance with national legislation.

Product Identification Marking is located on the bottom of the unit.

The symbols on this product represent the following:

Class II equipment (The construction of the product is double-insulated.)

IOn

Í Standby

For indoor use only

1. Subject to the conditions of this warranty Panasonic or its Authorised Service Centre will perform necessary service on the

product, without charge for parts or labour, if in the opinion of Panasonic the product is found to have a manufacturing

defect within one (1) year or (12 months) (the “warranty period”) from the date of purchase appearing on your purchase

receipt.

2. This warranty only applies to Panasonic products purchased in Australia and sold by Panasonic Australia, it’s Authorised

Distributors, or Dealers, and only where the products are used and serviced within Australia or its territories. Warranty

cover only applies to the services that are carried out by a Panasonic Authorised Service Centre and only if valid proof of

purchase is presented when the warranty service is requested.

3. This warranty only applies if the product has been installed and/or used in accordance with the manufacturer’s

recommendations (as noted in the operating instructions) under normal use and reasonable care (in the opinion of

Panasonic). The warranty does not cover damage, malfunction or failure resulting from use of incorrect voltages, incorrect

installation, accident, misuse, neglect, build-up of dirt or dust, abuse, maladjustment of customer controls, mains supply

problems, thunderstorm activity, infestation by insects or vermin, tampering or repair by unauthorised persons (including

unauthorised alterations), exposure to abnormally corrosive conditions, or any foreign object or matter having entered the

product.

4. This warranty does not cover the following items unless the fault or defect existed at the time of purchase:

(a) Consumable parts

(b) Cosmetic parts

(d) Information stored on Hard Disk Drives, Optical Discs, USB Devices, SD Cards, Tapes

(e) DTV reception issues caused by TV Aerial / Cabling / Wall socket(s)

5. Some products may be supplied with Ethernet connection hardware. The warranty is limited on such products and will not

cover:

(a) Internet and or DLNA connection / setup related problems

(b) Access fees and or charges incurred for internet connection

(d) Any indirect or consequential costs associated with the incorrect use or misuse of the hardware, its connection to the

internet or any other device.

6. To claim warranty service, when required, you should:

≥ Contact Panasonic’s Customer Care Centre on 132 600 for Service Centre information.

≥ Confirm the opening and acceptance times with the Authorised Service centre that you choose.

≥ Then send or take the product to a Panasonic Authorised Service Centre together with your proof of purchase receipt.

≥ Any freight and insurance costs associated with the transport of the product to and/or from your nearest Authorised

Service Centre must be arranged and paid for by you.

7. The warranties hereby conferred do not extend to, and exclude, any costs associated with the installation, de-installation or

re-installation of a product, including costs related to the mounting, de-mounting or remounting of any screen, (and any

other ancillary activities), delivery, handling, freighting, transportation or insurance of the product or any part thereof or

replacement of and do not extend to, and exclude, any damage or loss occurring by reason of, during, associated with, or

related to such installation, de-installation, re-installation or transit.

Panasonic Authorised Service Centres are located in major metropolitan areas and most regional centres of Australia,

however, coverage will vary dependant on product. For advice on exact Authorised Service Centre locations for your product,

please telephone our Customer Care Centre on 132600 or visit our website and use the Service Centre Locator.

In addition to your rights under this warranty, Panasonic products come with consumer guarantees that cannot be excluded

under the Australian Consumer Law. If there is a major failure with the product, you can reject the product and elect to have

a refund or to have the product replaced or if you wish you may elect to keep the goods and be compensated for the drop in

value of the goods. You are also entitled to have the product repaired or replaced if the product fails to be of acceptable

quality and the failure does not amount to a major failure.

If there is a major failure in regard to the product which cannot be remedied then you must notify us within a reasonable

period by contacting the Panasonic Customer Care Centre. If the failure in the product is not a major failure then Panasonic

may choose to repair or replace the product and will do so in a reasonable period of time from receiving notice from you.

If you require assistance regarding warranty conditions or any other enquiries, please visit the Panasonic

Australia website www.panasonic.com.au or contact by phone on 132 600

If phoning in, please ensure you have your operating instructions available.

Panasonic Warranty

THIS WARRANTY CARD AND THE PURCHASE DOCKET (OR SIMILAR PROOF OF PURCHASE)

SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES

Panasonic Australia Pty. Limited

ACN 001 592 187 ABN 83 001 592 187

1 Innovation Road, Macquarie Park NSW 2113

www.panasonic.com.au

PRO-031-F11 Issue: 5.0 23-01-2018

Control reference guide

1 Standby/on switch (Í/I)

2 Selects the frequency for radio source

Selects setting

(During standby mode) Adjusts hour

and minute setting

3 Press and hold to perform auto

presetting for FM stations.

4 Stores or selects preset radio station

5 Sets sleep timer

6 (During standby mode) Press and hold

to enter time setting mode.

7 Adjusts the volume (0 (minimum) to

16 (maximum))

(During standby mode)

Check alarm settings

Turn alarm on/off

≥ Press and hold to enter alarm setting

mode

8 Snoozes the alarm

Changes brightness of display

Confirms setting

9 Display

10 Speaker

The speaker does not have magnetic

shielding. Do not place this unit near PCs

or other magnetic devices.

11 Battery compartment

HOUR

MINUTE

SNOOZE / BRIGHTNESS / ENTER

ALARM /

⾼

SET

ヵヶワユチバチヴユロユヤヵヷヰロヶヮユ

PRESET

1-10

SLEEP

⾼

TIME

SET

⾼モヶヵヰ

ヱンユヴユヵ

10 11

Memory backup batteries (not supplied)

The memory backup batteries retain the clock settings during power supply interruption.

(These batteries do not power the unit.)

Use alkaline or manganese batteries.

Install the batteries so that the poles (r and s) align with those in the unit.

≥ “ ” will light up on the display if there is no battery inserted or when the battery level

is below its minimum.

≥ When the batteries are weak, “ ” flashes on the display. Replace the batteries with

new ones.

≥ Do not disconnect the unit from the power source when replacing the batteries.

Power source

Connect the AC adaptor firmly to the household mains socket.



≥ The unit is in the standby condition when the AC adaptor is connected. The primary circuit is

always “live” as long as the AC adaptor is connected to an electrical outlet.

R6/LR6, AA

ヰヱユワ

Bottom of unit

To household mains socket

AC adaptor

Preparing the antenna

Tape the antenna to a wall or column in a position with the least amount of interference.

Unit on/standby

Press [Í/I] to turn on the unit.

≥ The unit will enter FM mode. (The current FM frequency is displayed.)

If there is no operation for about 10 seconds, the display will show the time.

≥ Press [Í/I] again to switch the unit to standby mode.



≥ The unit is not turned off completely even in the standby condition. In the interest of energy

conservation, if you will not be using the unit for an extended period of time, we recommend

disconnecting the mains plug from the mains socket or removing the batteries. The unit

consumes a small amount of power even in the standby condition. (l “Specifications”)

≥ In standby mode, the time is displayed.

Listening to FM radio

You can preset up to 10 FM channels.

Preparation

≥ Turn the unit on.

Press and hold [j AUTO PRESET] for at least 2 seconds.

≥ Auto preset begins with the lowest frequency.

≥ The tuner starts to preset all the stations it can receive into the channels in ascending order.

≥ To cancel, press [TUNE / SELECT X, W].

Presetting stations automatically

Listening to preset stations

Antenna

Adhesive tape (not supplied)

Press [PRESET 1-10] repeatedly to select desired channel number.

∫ Tuning to a station

Press and hold [TUNE / SELECT X, W] until the frequency starts changing quickly.

≥ The unit stops tuning when it finds a station.



≥ Press [TUNE / SELECT X, W] repeatedly to search for the required station manually.

∫ Presetting stations manually

1 While listening to a radio broadcast:

Press and hold [PRESET 1-10] for at least 2 seconds.

2 Press [TUNE / SELECT X, W] to select the desired preset channel number and

then press [SNOOZE / BRIGHTNESS / ENTER].



≥ The station occupying a channel is erased if another station is preset in that channel.

RC-800_TQBJ2233_eng.fm 1 ページ２０２０年６月３０日　火曜日　午後３時１０分

Panasonic RC-800 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic RC-800

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info