Bedienungsanleitung Panasonic RF-D30BT (Seite 9 von 16) (Englisch)

734869

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

TQBJ2225

Bluetooth

operations

You can listen to the sound from the Bluetooth

audio

device from this unit wirelessly.

≥ Refer to the operating instructions of the

Bluetooth

device for details.

Preparation

≥ Turn on the Bluetooth

feature of the device and

place the device near this unit.

∫ Pairing with Bluetooth

devices

1 Press [ ].

≥ If “Pairing” is indicated on the display, go to step 3.

2 Press and hold [j PAIRING] until “Pairing”

appears.

≥ This unit enters pairing mode.

Alternatively, you can set this unit to pairing mode via

this unit’s menu.

§1

3 Select “RF-D30BT” from the Bluetooth

device’s

Bluetooth

menu.

≥ The MAC address (alpha-numerical string that is

unique to each unit) may be displayed before

“RF-D30BT” is displayed.

≥ “Connected” is indicated on the display.

4 Start playback on the Bluetooth

device.

§1 To enter pairing mode via this unit’s menu

1 Press and hold [j MENU] for at least

2 seconds.

2 Press [4/:]

§2

or [3/9]

§2

to select

“Pairing” and then press [ENTER].

3 Press [4/:]

§2

or [3/9]

§2

to select

“Yes” and then press [ENTER].

≥ To cancel, select “No”.

§2 Alternatively, you can turn [TUNE/SELECT] to select

menu item/setting.

∫ Connecting a paired Bluetooth

device

1 Press [ ].

≥ “Ready” is indicated on the display.

2 Select “RF-D30BT” from the Bluetooth

device’s

Bluetooth

menu.

≥ “Connected” is indicated on the display.

3 Start playback on the Bluetooth

device.

≥ Press [1/;] to pause or resume the playback.

≥ Press [4/:] or [3/9] to skip track.



≥ If prompted for the passkey, input “0000” or “1234”.

≥ You can register up to 8 devices with this unit. If a 9th

device is paired, the device that has not been used the

longest will be replaced.

≥ This unit can only be connected to one device at a time.

≥ When “Bluetooth” is selected as the source, this unit will

automatically try and connect to the last connected

Bluetooth

device. (“Linking” is indicated on the display

during this process.) If the connection attempt fails, try to

establish a connection again.

While a Bluetooth

device is connected

Press and hold [j PAIRING] until “Pairing” appears.

≥ Alternatively, you can disconnect a Bluetooth

device via

this unit’s menu as follows.

1 While a Bluetooth

device is connected:

Press and hold [j MENU] for at least

2 seconds.

2 Press [4/:]

§3

or [3/9]

§3

to select

“Disconnect” and then press [ENTER].

3 Press [4/:]

§3

or [3/9]

§3

to select “Yes”

and then press [ENTER].

(“Ready” is indicated on the display.)

≥ To cancel, select “No”.

§3 Alternatively, you can turn [TUNE/SELECT] to select

menu item/setting.



≥ The Bluetooth

device will be disconnected if a different

audio source (e.g., “DAB”) is selected.

Press [DISPLAY] to show the date.

Connecting via Bluetooth

Disconnecting a Bluetooth

device

Viewing available information

RF-D30BT_TQBJ2225_eng.book 9 ページ２０２０年５月１３日　水曜日　午前１１時４４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic RF-D30BT Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic RF-D30BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info