Bedienungsanleitung Panasonic RX-D70 (Seite 12 von 24) (Englisch)

696405

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

TQBJ2201

Listening to DAB/DAB+

Preparation

≥ Extend the antenna. (l 5)

≥ Turn the unit on.

≥ Press [DAB/FM] repeatedly to select “DAB”.

The first time you enter DAB mode, or if the station

list is empty, the unit will start the full scan and

memorise the stations.

You can perform the full scan procedure when there

is a new station or a station becomes available.

1 Press [PLAY MENU].

2 Press [:, 9] to select “Full scan” and then

press [1/;] to start full scan.

To cancel, press [PLAY MENU].

∫ Remove unavailable listed stations

This unit indicates those stations that are closed or

no longer available with a question mark in front of

the station name. You can remove these stations

from the station list.

1 Press [PLAY MENU].

2 Press [:, 9] to select “Prune” and then

press [1/;].

3 Press [:] to select “Yes” and then press

[1/;].

To cancel, press [9] to select “No”.

Press [:] or [9] to select a station and then

press [1/;].



≥ “ ” indicates a secondary service station. Secondary

service stations are always listed next to their primary

station in the station list.

You can preset up to 30 DAB/DAB+ channels.

1 While listening to the radio broadcast, press and

hold the numeric button for at least 2 seconds to

enter your desired preset channel number.

To enter a 2-digit preset channel number

Press and hold [S10] for at least 2 seconds, then press

the numeric buttons to enter the 2-digit number.

2 Press [1/;].



≥ The station occupying a channel is erased if another

station is preset in that channel.

Press the numeric buttons or [PRESET j, i] to

select the preset station and then press [1/;].

You can manually tune to 1 frequency block. This can

be useful when you are adjusting the antenna to

achieve the best possible reception and scanning a

particular frequency block to update the station list.

1 Press [PLAY MENU].

2 Press [:, 9] to select “Manual tune” and

then press [1/;].

3 Press [:, 9] to select the frequency block

that is receivable in your region and then press

[1/;].

The display shows the received signal strength of the

selected frequency block. Adjust the antenna to achieve

the best reception.

Adjust the antenna so that the received signal strength

(solid rectangles) exceeds the threshold indicator.

You can view various information about the DAB

broadcast such as dynamic label information (if

available), signal strength, program type, ensemble

name, frequency, bit rate, DAB variant, time and

date.

Press [DISPLAY] repeatedly to view the available

information.

Memorising stations

Listening to the memorised stations

Presetting DAB/DAB+ stations

Listening to preset DAB/DAB+

stations

Manually tuning 1 frequency block

Viewing available information

ュモ

ャ

⿄モƷ⿀⿆⿃⾽⿈⿁⿇ヮラ〉

ƛƛƛƛ

ƛƛƛƛƛƛƛƛƜƜƜ

Threshold indicator

RX-D70BT-EG-TQBJ2201_Eng.book 12 ページ２０１９年４月２４日　水曜日　午後６時４５分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic RX-D70 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic RX-D70

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info