Bedienungsanleitung Panasonic RXD55EG (Seite 6 von 28) (Englisch, Spanisch, Polnisch)

608289

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

ENGLISHESPAÑOL

RQTX1041

Using the FM/AM radio

Manual tuning Manual tuning

1 Press [FM/AM] to select “FM” or “AM”.

2 Press [TUNE MODE] to select “MANUAL”.

RX-D55

If “PGM” is displayed, press [TUNE MODE] to clear it.

RX-D50

3 Press [2/3] or [5/6] (main unit: [–/2] or [6/+]) to select

the frequency of the required station.

To tune automatically

Press and hold [2/3] or [5/6] until the frequency starts changing

rapidly. The unit begins auto tuning, stopping when it ﬁ nds a station.

• Auto tuning may not function when there is excessive interference.

• To cancel auto tuning, press [2/3] or [5/6] once again.

To improve reception

FM: Extend the whip antenna and adjust its direction.

AM: Adjust the position of the unit.

To improve FM sound quality

When “FM” is selected

Press [FM MODE] to display “MONO”.

To cancel

Press [FM MODE] again.

• MONO is also cancelled if the frequency is changed.

• Turn off “MONO” for normal listening.

Memory preset Memory preset

Up to 16 stations each can be set in the FM and AM bands.

✒

Preparation

Press [FM/AM] to select “FM” or “AM”.

Automatic presetting

RX-D55

1 Press [PLAY MODE] repeatedly to select either “CURRENT” or

“LOWEST”.

CURRENT

Tuning begins from the current frequency.

LOWEST

Tuning begins from the lowest frequency.

2 Press [AUTO PRESET] to start presetting.

RX-D50

Press [AUTO PRESET] to start presetting.

The tuner presets all the stations it can receive into the channels in ascending

order. When ﬁ nished, the last station memorised is tuned in.

Manual presetting

1 Press [PROGRAM]

RX-D55

([MANUAL PRESET]

RX-D50

“PGM” is displayed.

2 Within 10 seconds or so

Press [2/3] or [5/6] to tune to

the required station.

3 Press [PROGRAM]

RX-D55

([MANUAL PRESET]

RX-D50

4 Press the numeric buttons to select a channel.

The station occupying a channel is erased if another station is preset to that

channel.

5 Repeat steps 2 to 4 to preset more stations.

Selecting a preset station

Press the numeric buttons to select a channel.

For channels 10 to 16 press [

10], then the two digits.

1 Press [TUNE MODE] to select “PRESET”.

RX-D55

Press [TUNE MODE] to display “PGM”.

RX-D50

2 Press [2/3] or [5/6]

(main unit: [–/2] or [6/+]) to select the

channel.

Preset channel

USB (

RX-D55

only)

The USB connectivity enables you to connect and play MP3 tracks from USB

mass storage class. Typically, USB memory devices (bulk only transfer).

Connecting a USB mass storage device Connecting a USB mass storage device

✒

Preparation

Before connecting any USB mass storage device to the unit, ensure that the

data stored therein has been backed up.

It is not recommended to use a USB extension cable. The device connected via

the cable will not be recognised by this unit.

USB enabled

device

(not included)

Playing a USB mass storage device

1 Reduce the volume and connect the USB mass storage device to the

USB port.

2 Press [4/9, USB] to start play.

Stop playback

Press [8] (stop) during play.

“RESUME” is displayed. The position is memorised.

Press [4/9, USB] to resume play.

Press [8] (stop) again to clear the position.

Pause play

Press [4/9, USB] during play.

Press again to resume play.

Skip tracks

Press [2/3] or [5/6] (main unit: [–/2] or

[6/+]).

Skip album

Press [R/T, ALBUM] in the play mode.

Press [R/T, ALBUM] once and then the numeric

buttons in the stop mode.

Recording from a USB mass storage device

1 Press [2/3] or [5/6] (main unit: [–/2] or [6/+]) to select

the desired track for recording.

2 Press [

] on the main unit to start recording.

✒

Note

When you connect your digital audio player to the USB port, it charges all the

time except in standby mode.

✒

NOTE on USB

Compatible devices

Devices which are deﬁ ned as USB mass storage class:

• USB devices that support bulk only transfer.

• USB devices that support USB 2.0 full speed.

Supported format

• Folders are deﬁ ned as album.

• Files are deﬁ ned as track.

• Track must have the extension “.mp3” or “.MP3”.

• CBI (Control/Bulk/Interrupt) is not supported.

• A device using NTFS ﬁ le system is not supported. [Only FAT 12/16/32

(File Allocation Table 12/16/32) ﬁ le system is supported.]

• Depending on the sector size, some ﬁ les may not work.

• Maximum album: 255 albums

• Maximum track: 2500 tracks

• Maximum track in one album: 999 tracks

AM allocation setting AM allocation setting

By main unit only

This system can also receive AM broadcasts allocated in 10 kHz steps.

To change the step from 9 kHz to 10 kHz

1 Press and hold [FM/AM].

After a few seconds the display changes to a ﬂ ashing display of the current

minimum frequency.

2 Continue to hold down [FM/AM].

• When the minimum frequency changes, release the button. To return to the

original step, repeat the above steps.

• After the setting is changed, any previously preset frequency will be

cleared.

RQTX1041-2Z_1gb.indd 6RQTX1041-2Z_1gb.indd 6 4/8/2010 2:23:13 PM4/8/2010 2:23:13 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic RXD55EG Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic RXD55EG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info