Bedienungsanleitung Panasonic SA-XR700 (Seite 39 von 48) (Englisch)

502462

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

RQT8743

The radio

ENGLISH

Preset tuning

Presetting stations

n Auto presetting

1 Tune to the frequency where you want to

begin presetting. (á page 38)

Set the channel reception to FM 87.50 MHz or AM 522 kHz

(9 kHz steps), AM 530 kHz (10 kHz steps) if you want automatic

presetting to start from the lowest frequency.

Preset channels that are automatically assigned by this unit

are:

FM: 1 to 30

AM: 21 to 30

Preset the FM stations first. If the AM stations are preset

before the FM stations, they will be erased when the FM

stations are preset.

2 Press to enter the MENU.

3 Select “TUNER ” and confirm the setting.

4 Select “AUTO MEMO ” and confirm the setting.

5 Select “START ” and press [ENTER].

Select “CANCEL ” to cancel.

• During automatic presetting, the memory indicator ( ) flashes

and the frequency scrolls. The memory indicator and channel

number are displayed for a second when a station is preset.

•

The last station to be preset is displayed when presetting finishes.

•F

requencies may not be preset correctly when broadcast waves are

too strong or too weak. In such cases, carry out presetting manually.

n Manual presetting

1 Tune to the station you want to preset.

(á page 38)

2 Press to enter the MENU.

3 Select “TUNER ” and confirm the setting.

4 Select “MEMORY ” and confirm the setting.

5 Select a channel number and press [ENTER].

“STORED ” is displayed.

• To continue presetting, press [TUNE 2 or 1] to tune

another station from step 1.

6 Press [-MENU/–SETUP, RETURN] twice to

select “EXIT ” and press [ENTER].

• FM stations can also be preset in the MONO mode

(below).

Listening to preset stations

(Using the remote control) (Using the unit)

n Select the channel.

1 Press to enter the MENU.

2 Select “TUNER ” and confirm the setting.

3 Select “TUNE MODE ” and confirm the setting.

4 Select “PRESET ” and confirm the setting.

5 Press [-MENU/–SETUP, RETURN] twice to

select “EXIT ” and press [ENTER].

6 Press to select the channel.

• Hold down the button to change channels faster.

• Select “MANUAL ” in step 4 when you wish to perform manual

tuning (á page 38).

Press

• Hold down the button to change

channels faster.

Press the numbered buttons to select the channel.

Press

To select a two digit number

e.g. 21

: [ ≧10, -/--] → [2] → [1]

Reducing excessive noise

Select if noise is excessive during radio reception.

Press [-MENU/–SETUP, RETURN] to enter the MENU.

n During FM stereo reception

You can improve FM reception by switching reception to

monaural.

1 Select “TUNER ” and confirm the setting.

2 Select “FM MODE ” and confirm the setting.

3 Select “MONO ” and confirm the setting.

• When this is set, “MONO” appears on the display.

•Select “AUTO ” to cancel.

4 Press [-MENU/–SETUP, RETURN] twice to

select “EXIT ” and press [ENTER].

n During AM reception

When there is a lot of noise interference with an AM broadcast,

try switching to this mode.

1 Select “TUNER ” and confirm the setting.

2Select “BEAT PROOF ” and confirm the setting.

3 Select “MODE 1 ” or “MODE 2 ” and confirm

the setting.

Factory setting: MODE 1

4 Press [-MENU/–SETUP, RETURN] twice to

select “EXIT ” and press [ENTER].

MENU/

SETU

RETURN

MENU/

SETU

RETURN

MENU/

SETU

RETURN

TUNE

-/-

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SA-XR700 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SA-XR700

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info