612584
10
Zoom out
Zoom in
Vorherige Seite
1/20
Nächste Seite
SFC modes
SURROUND mode
STEREO mode
10
RQT6847
Basic operations
Switch on.
POWER
8
Turn
SPEAKERS on.
SPEAKERS
Select input.
TUNER,/ CD,/DVD
TAPE,/ VCR 2,/VCR 1,/ TV
INPUT SELECTOR
DIGITAL INPUT
Select the DSP
sound mode.
Start play of
the source.
Adjust the
volume.
DOWN UP
VOLUME
1
2
3
4
5
6
DSP
SOUND MODE
SPEAKERS
For CD, DVD, TV
Select digital or analog
input.
When you finish listening
Be sure to reduce the volume and press [POWER, 8] to switch the unit
to standby.
For your reference
In rare cases, the unit may have trouble recognizing the digital signals on
discs.
¡ With the PCM signals on CDs, this may cause the beginning of a track
to be cut off. Engage the PCM FIX mode if this occurs.
¡ With DTS, the signals may not be recognized at all. Engage the DTS
FIX mode if this occurs.
While the input source is selected and digital input is engaged:
Press and hold [DIGITAL INPUT].
The current mode is displayed. Press again to change the mode.
Each time you press the button:
AUTO
/ PCM FIX / DTS FIX
When a FIX mode is on, the unit cannot process other signals. This may
cause noise to be output. Select
AUTO
if this occurs.
The selected mode is stored for each input source even if the unit is
turned off.
Notes on using the Digital Signal Processor
The digital signal processor in this unit can decode the
following signals:
¡¡
Dolby Digital
¡¡
DTS
¡¡
PCM
It cannot decode:
¡Other digital signals, such as MPEG
¡PCM with sampling frequencies of 88.2 kHz, 96 kHz, 176.4 kHz or
192 kHz
¡Dolby Digital RF signals from a laser disc player
Use this mode to play digital or analog stereo sources or to play
surround sources through two speakers. When surround sources
are played in this mode, the sounds intended for the other
speaker channels are played through the front speakers.
Select this mode when you are playing a digital surround source
(Dolby Digital or DTS).
Also select this mode when playing analog or digital stereo
sources. The Dolby Pro Logic
2 processor works not only on
sources recorded with Dolby Surround, but
also on any stereo source. The following
modes are available when using Dolby Pro
Logic
2.
Enjoy an enhanced sound experience with greater presence and
spread by using these SFC (sound field control) modes with
PCM or analog stereo sources.
The SFC modes cannot be used if the input signal is Dolby
Digital or DTS. Choose from the
following modes.
DOLBY
PRO LOGIC 2
SFC MODE
<>
SPEAKERS
SOUND MODE
STEREO
LR
SPEAKERS
DIGITAL
SOUND MODE
SURROUND
LCR
SL
SR LFE
SPEAKERS
SOUND MODE
SFC
Step
1 2 3
4
/
/
/
/
Step 4
,
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic SAHE75 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Panasonic SAHE75

Panasonic SAHE75 Bedienungsanleitung - Englisch - 20 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info