Bedienungsanleitung Panasonic SC-AK270 (Seite 14 von 20) (Englisch)

63707

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

RQT8043

RQTV0279

ESPAÑOLESPAÑOLESPAÑOLESPAÑOLESPAÑOL

Setting the clock Setting the clock

This is a 24-hour clock.

1 Press [CLOCK / TIMER] to select “CLOCK”.

Each time you press the button:

CLOCK

˚ PLAY

Original display

˚ REC

2 (

Within 8 seconds or so

)

Press [4, 4 / REW] or [¢ , 3 / FF] to set the time.

3 Press [CLOCK / TIMER] to ﬁ nish setting the time.

Displaying the clock

Press [CLOCK

TIMER] once when the unit is on or in standby mode.

The time is displayed for a few seconds.

Note:

Reset the clock regularly to maintain accuracy.

Using the play or record timer Using the play or record timer

You can set the timer to come on at a certain time to wake you up

(play timer) or to record from the radio or the external equipment

(record timer).

Play timer and record timer cannot be used together.

Turn the unit on and set the clock.

Timer Action

Play timer Prepare the music source you want to listen to;

cassette, disc number (1 to 5), radio or other

external equipments, and set the volume.

Record

timer

Check the cassette’s erasure prevention tabs

(

\ page 12), insert the cassette and tune to the

radio station (

\ page 13) or select the external

equipment (

\ page 15 to 16).

1 Press [CLOCK/TIMER] to select the timer function.

Each time you press the button:

CLOCK

˚ PLAY

Original display

˚ REC

˚PLAY : to set the play timer

˚REC : to set the record timer

(Proceed to the next step

within 8 seconds

)

2 Press [4 , 4 / REW ] or [¢ , 3 / FF] to set the starting time.

Play timer indicator

Start time

Record timer indicator

3 Press [CLOCK / TIMER] to conﬁ rm.

4 Repeat steps 2 to 3 to set the ﬁ nishing time.

Finish time

Using the timers

To activate the timer

5 Press [ ˚PLAY/REC] repeatedly to turn on your desired

timer.

˚ PLAY

no display (off)

˚ REC

6 Press [y] to turn off the unit.

The unit must be off for the timers to operate.

Other basic operations

To Action

Change the

settings

Repeat steps 1 to 4 and 6 (\ see left and

above).

Change the

source or

volume

1) Press [ ˚PLAY/REC] to clear the timer

indicator from the display.

2) Make changes to the source or volume.

3) Perform steps 5 to 6 (

\ see above).

Check the

settings

Press [CLOCK/TIMER] repeatedly to select

˚PLAY or ˚REC.

Cancel Press [ ˚PLAY/REC] to clear the timer

indicators from the display.

If you use the unit after the timers are set

After using, check that the correct tape or disc are loaded before

turning the unit off.

Note:

• The play timer will start at the preset time with volume increasing

gradually to preset level.

• The record timer will start 30 seconds before the set time with the

volume muted.

• The timer comes on at the set time every day if the timer is on.

• The unit must be in the standby mode for the timer to function.

• If you turn the unit off and on again while a timer is functioning,

the ﬁ nish time setting will not be activated.

• If MUSIC PORT or USB is selected as the source when the timer

comes on, the system turns on and engages MUSIC PORT or

USB as the source. If you wish to playback or record from the

other equipments, just activate the equipments’ play mode and

increase the volume. (See the other equipments’ instruction

manual.)

Using the sleep timerUsing the sleep timer

This function enables you to turn off the unit automatically after the

set time.

Press [SLEEP, –AUTO OFF] to select your desired time.

30 MIN 60 MIN

90 MIN 120 MIN OFF

Sleep timer indicator

To cancel

Press [SLEEP, –AUTO OFF] to select “OFF”.

Changing the remaining time

Press [SLEEP, –AUTO OFF] to show the remaining time and press

[SLEEP, –AUTO OFF] again to select your desired time.

Note:

• The play and sleep timer or the record and sleep timer can be

used together.

• The sleep timer always has priority. Be sure not to overlap timer

settings.

• The sleep timer turns off when you perform the record function.

RQTV0279-2B.indd 14RQTV0279-2B.indd 14 4/3/08 10:55:13 AM4/3/08 10:55:13 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-AK270 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-AK270

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info