Bedienungsanleitung Panasonic SC-AK770 (Seite 11 von 24) (Englisch)

68360

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

RQT8043

RQTV0286

ESPAÑOLESPAÑOLESPAÑOLESPAÑOLESPAÑOL

Checking the track information

You can select a desired disc display mode.

Press [DISPLAY] during play or pause.

Elapsed play time Remaining play time

Elapsed

play time

Remaining

play time

Album

Name

Tag

(Artist)

Tag

(Track)

Tag

(Album)

Track

Name

Playing bit rate

(during play only)

Note:

• “NO TAG” is displayed if titles with tags have not been entered.

• Maximum number of displayable characters: approximately 30

• This unit can display album, track and artist name with MP3 ID3

tags (version 1.0 and 1.1).

• ID3 is a tag embedded in MP3 track to provide information about

the track.

• Titles containing text data that the unit does not support cannot

be displayed.

• Titles entered with 2-byte code cannot be displayed correctly on

this unit.

Advanced playAdvanced play

Program play

This function allows you to program up to 24 tracks.

1 Press [6 , CD] and then [7, CLEAR].

2 Press [PROGRAM].

“PGM” appears.

3 Press [DISC] and then [1] ~ [5] to select the disc.

4 Press the numeric buttons to select your desired track.

Repeat steps 3 to 4 to program other tracks.

5 Press [6 , CD] to start play.

1 Press [DISC] and then [1] ~ [5] to select the disc.

2 Press [7 , CLEAR].

3 Press [PROGRAM].

4 Press [5/∞, ALBUM] to select your desired album.

5 Press [4 , / REW] or [¢ , / FF] to select the track.

6 Press [OK].

Repeat steps 4 to 6 to program other tracks.

7 Press [6 , CD] to start play.

For two-digit track, press [

10] once then the two digits.

For three-digit track, press [

10] twice then the three digits.

To Action

Cancel

program mode

Press [PROGRAM] in the stop mode.

Replay the

program

Press [PROGRAM] then [6, CD] in the stop

mode.

Add to the

program

Repeat steps 3 to 4 in the stop mode.

Repeat steps 4 to 6 in the stop mode.

Check

program

contents

Press [4,

/ REW] or [¢, / FF] when

“PGM” is displayed in the stop mode.

The track number, program order and disc

number are displayed:

Program order

Track number

The program order is displayed followed by the

album number and track number.

Clear the last

track

Press [DEL] in the stop mode.

Clear all

programmed

tracks

Press [7, CLEAR] in the stop mode.

“CLEAR ALL” is displayed.

Note:

• You cannot program CD-DA together with MP3 tracks.

• The program memory is cleared when you change a disc or open

the disc tray.

• You cannot program more than one disc.

Repeat play

You can repeat program play or other selected play mode.

Press [REPEAT].

“

” is displayed.

To cancel

Press [REPEAT] again.

“

” is cleared.

Note:

You can use repeat mode with “Program play” (\ see left) and

“Play Mode function” (\ page 10).

RQTV0286-1B.indd 11RQTV0286-1B.indd 11 5/5/08 3:54:11 PM5/5/08 3:54:11 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-AK770 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-AK770

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info