Bedienungsanleitung Panasonic SC-BT100 (Seite 10 von 48) (Englisch)

61553

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

RQT9161

STEP 3 Setting up

Batteries

Insert so the poles (i and j) match those in the remote

control.

When closing the lid, insert it from the j (minus) side.

≥Do not use rechargeable type batteries.

≥Do not mix old and new batteries.

≥Do not use different types at the same time.

≥Do not heat or expose to flame.

≥Do not leave the battery(ies) in an automobile exposed to

direct sunlight for a long period of time with doors and

windows closed.

≥Do not take apart or short circuit.

≥Do not attempt to recharge alkaline or manganese batteries.

≥Do not use batteries if the covering has been peeled off.

Mishandling of batteries can cause electrolyte leakage which

can damage items the fluid contacts and may cause a fire.

Remove batteries if the remote control is not going to be used

for a long period of time. Store in a cool, dark place.

Use

When the system is switched on for the first time, a screen for the basic settings is displayed automatically. Follow the on-screen

prompts to make basic settings for the system.

Remote control

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type

recommended by the manufacturer. Dispose of used

batteries according to the manufacturer’s instructions.

R6/LR6, AA





30˚

10˚

Remote control signal sensor

7 m directly in front of the unit

If you cannot operate the unit using the remote control after

changing the batteries, please re-enter the codes (> 42).

Easy Setting

1 Press [Í].

Setup screen appears.

≥If this unit is connected to a Panasonic TV (VIERA) supporting HDAVI Control

2 or HDAVI Control 3 via an HDMI cable, then the “On-screen Language” and

“TV Aspect” setting information on the TV are captured from the TV.

2 Follow the on-screen instructions and make the settings with

[3, 4] and [OK].

“On-screen Language” (> 35) and “TV Aspect” (> 36) are set.

≥You can perform this setup anytime by selecting “Easy Setting” in the Setup menu.

(

> 34)

≥You can also change these settings individually. (

> 35, 36)

Set up the radio

Presetting the radio stations automatically

Up to 30 stations can be set.

1 Press [FM] to select “FM”.

2 Press and hold [OK].

Release the button when “M” begins to flash.

The tuner tunes to the lowest frequency and starts to

preset all the stations it can receive into the channels

in ascending order.

≥“SET OK” is displayed when the stations are set, and the radio tunes to the last

preset station.

≥“ERROR” is displayed when automatic presetting is unsuccessful. Preset the

channels manually (> 11).

[Í]

[OK]

[3, 4]

[OK]

[FM]

96/24

DD EX

NEO:6

e.g., Display

SCBT100EGEB-RQT9161-B.book Page 10 Thursday, April 10, 2008 3:57 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-BT100 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-BT100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info