61553
36
Zoom out
Zoom in
Vorherige Seite
1/48
Nächste Seite
36
RQT9161
Changing settings with the Setup menu
Summary of settings Boxed items are the factory presets.
“TV/Device Connection” menu
TV Aspect
Set to match the type of TV connected.
When connected to a 4:3 aspect TV:
4:3 Pan & Scan:
Video recorded for a widescreen is played as Pan &
Scan (unless prohibited by the producer of the disc).
When playing BD-Video, video is output as “4:3
Letterbox”.
4:3 Letterbox: Video recorded for a widescreen is played in the
letterbox style.
When connected to a 16:9 widescreen TV:
16:9 : Video recorded for 4:3 aspect screen is displayed as a 4:3
ratio image in the centre of the screen.
16:9 Full: Video recorded for 4:3 aspect screen is displayed as a
horizontally stretched 16:9 image.
Time Delay
When connected with a Plasma display, adjust if you
notice the audio is out of sync with the video.
[Auto] 0ms 20ms 40ms 60ms 80ms 100ms
120ms140ms
When using VIERA Link “HDAVI Control” with “HDAVI Control 3”
compatible TV (
> 30), select “Auto”. Audio and video will automatically
be set in sync. (This works only when “BD/DVD/CD”, “SD”, “AUX” or
“D-IN” is selected as the source.)
HDMI Connection
Press [OK] to show the following settings.
HDMI Video Mode
Select “On” when video is output from HDMI AV
OUT terminal.
[On]: Images are output from the HDMI terminal in the resolution set in
“HDMI Video Format”. Video from COMPONENT VIDEO OUT
terminal is output as “576i/480i”.
Off
Images are output in the resolution set in “Component Resolution”.
HDMI Video Format
The items supported by the connected devices are
indicated on the screen as “¢”. When any item
without “¢” is selected, the images may be
distorted.
[Automatic]: Automatically selects the output resolution best suited to
the connected TV (1080p, 1080i, 720p or 576p/480p).
576p/480p 720p 1080i 1080p
When the unit is connected to an amplifier/receiver that does not support
the resolution set on the unit, the video cannot be output properly. In this
case, use the HDMI cable to connect the unit to the TV and then connect
the unit to the amplifier/receiver using a cable other than HDMI.
BD-Video 24p Output
When playing BD-Video recorded in 24 frames, this
unit displays each frame at 1/24 second intervals
s
the
same interval originally shot with the film movie.
This item can be set only when the unit is
connected to a TV with an HDMI terminal that
supports 1080/24p input.
On: Images in 24p are output in 24p as they are. (This is effective only
when “HDMI Video Format” is set to “Automatic” or “1080p” and “TV
Aspect” is set to “16:9” or “16:9 Full”.) However,
when video is being output at 24 frames, images from any other
terminal than the HDMI terminal may not be output properly.
when images other than 24p are played, images are output at 60p.
[Off]
HDMI Output Range
Effective when connected to a device that only
supports RGB output.
[Standard]
Enhanced: When the black and white images are not distinct.
HDMI Audio Output
This setting selects whether or not to output audio
from HDMI.
When this is set to “On”, Dolby TrueHD, Dolby
Digital Plus, DTS-HD Master Audio, DTS-HD
High Resolution Audio are output as Dolby Digital
from system speakers.
On: To output audio through TV speakers (output as 2ch PCM,
regardless of source audio format channel number).
[Off]: To output audio through system speakers. (The audio is output
using the settings of this unit.)
VIERA Link
Set to use “HDAVI Control” function when
connected with an HDMI cable to a device that
supports “HDAVI Control”.
[On]: Select when you want to use “HDAVI Control”.
Off: Select when you do not want to use “HDAVI Control”.
Component Resolution
This sets the video output resolution when using
COMPONENT VIDEO OUT terminals.
[576i/480i] 576p/480p 720p 1080i
480i, 480p: When playing NTSC discs
576i, 576p: When playing PAL discs
Even if you select “720p” or “1080i”, the video output resolution is
restricted to “576p/480p” when DVD-Video, DivX and BD-Video discs
recorded at a rate of 50 frames per second is output from the
COMPONENT VIDEO OUT terminals.
TV System
Change the setting to match the equipment you are
connecting with.
If picture output is not smooth, change the setting.
When NTSC contents are played, they are outputted
in the signal format specified in the “NTSC Contents
Output”, irrespective of the settings here.
NTSC: Select when connecting to a NTSC TV.
[PAL]: Select when connecting to a PAL or multi-system TV.
SCBT100EGEB-RQT9161-B.book Page 36 Thursday, April 10, 2008 3:57 PM
36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic SC-BT100 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Panasonic SC-BT100

Panasonic SC-BT100 Bedienungsanleitung - Deutsch - 48 seiten

Panasonic SC-BT100 Bedienungsanleitung - Englisch - 7 seiten

Panasonic SC-BT100 Bedienungsanleitung - Holländisch - 96 seiten

Panasonic SC-BT100 Bedienungsanleitung - Dänisch - 96 seiten

Panasonic SC-BT100 Bedienungsanleitung - Französisch, Italienisch - 96 seiten

Panasonic SC-BT100 Bedienungsanleitung - Spanisch - 96 seiten

Panasonic SC-BT100 Bedienungsanleitung - Polnisch - 96 seiten

Panasonic SC-BT100 Bedienungsanleitung - Schwedisch - 96 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info