Bedienungsanleitung Panasonic sc bt200 (Seite 52 von 60) (Englisch)

371637

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

RQT9508

Messages

Frequently asked questions

On the unit’s display (continued) Page

“[W1]” is flashing.

(when using the optional wireless

accessory: SH-FX70)

≥There is no link between this unit and the wireless system. Check that the wireless system

is plugged into the household AC outlet and is turned on.

≥Ensure that the digital transmitter is fully inserted into the slot of this unit.

≥If the wireless system is not used, disconnect the digital transmitter from this unit.

—

U59 ≥The unit is hot.

The unit switches to standby for safety reasons. Wait for about 30 minutes until the

message disappears.

Select a position with good ventilation when installing the unit. Do not block the cooling fan

on the rear of the unit.

—

U72

U73

≥The HDMI connection acts unusually.

– The connected equipment is not HDMI compatible.

–Please use HDMI cables that have the HDMI logo (as shown on the cover).

–The HDMI cable is damaged.

—

H or F

(“

 ” stands for a number.)

≥Check and correct the speaker cable connections.

≥There is something unusual. (The service number displayed after H and F depends on the

unit’s condition.)

≥Check the unit using the troubleshooting guide. If the service number does not disappear,

do the following:

1 Disconnect the plug from the household AC outlet wait a few seconds, then reconnect

it.

2 Press [POWER Í/I] to turn the power on. (The unit may be fixed.)

If the service number does not disappear despite doing the above, request service from

the dealer. Inform the dealer of the service number when requesting service.

—

47 to 50

IPOD OVER CURRENT ERROR ≥The iPod is drawing too much power. Remove the iPod, and turn the unit off and on again. —

START ≥The system is being restarted during the firmware update. Please do not turn off power. 32

UPD/ ≥The firmware is being updated. 32

FINISH ≥The firmware update is complete. 32

NOT CONDITIONAL ≥The requested operation cannot be conducted. —

llllllll ≥The main unit could not save the modified settings. Some settings may need to be reset. —

Setup Page

Can I connect other speakers? ≥Speakers other than those supplied cannot be used. This system achieves ideal audio

properties through the combination of the main unit and the supplied speakers. Using

other speakers may damage the system and will not produce correct audio characteristics

(e.g., no bass sounds).

—

My TV has COMPONENT VIDEO IN

terminals and HDMI IN terminal.

Which should I connect with?

≥The different levels of picture quality input are listed below in order from highest to lowest.

HDMI IN )COMPONENT VIDEO IN )VIDEO IN. However, it will take longer for the

picture output to start up when this unit is connected with the HDMI IN terminal.

—

Disc

Can I play BD-Video and DVD-Video

bought in another country?

≥You can play them if the video standard is NTSC; however you cannot play:

–BD-Video discs that do not include region “A”.

–DVD-Video discs that do not include region “1” or “ALL”.

Refer to the disc’s jacket for more information.

Cover

Can BD-Video/DVD-Video that does

not have a region code/number be

played?

≥The region management information for BD-Video/DVD-Video indicates that the disc

conforms to industry standards. You cannot play discs that do not conform to industry

standards or do not have a region code or number.

—

Please tell me about disc compatibility

with this unit.

≥Refer to “Disc and card information” and “About MP3/JPEG files”.

≥You cannot write to a disc with this unit.

42, 44

—

SD card

What kinds of operations are available

on the SD card slot on this unit?

≥The following operations are available.

– Play back JPEG data recorded with a digital camera etc.

–Play back AVCHD motion pictures recorded with Panasonic High Definition Video

Camera

–Play back MPEG-2 motion pictures recorded with Panasonic Standard Definition Video

Camera

≥If a BD-Video disc supporting BD-Live or BONUSVIEW is used, it is possible to copy

secondary video, etc. from the Internet or disc to the card and play it back together with

the images on the disc, etc.

—

What kinds of cards can be used? ≥SD Memory Cards (from 8 MB to 2 GB), SDHC Memory Cards (from 4 GB to 32 GB),

miniSD Cards*, and microSD Cards* can be used.

* A miniSD Card and a microSD Card must be used in the adaptor included with the

memory card.

Please confirm the latest information on the following website.

http://panasonic.co.jp/pavc/global/cs

(This site is in English only.)

Reference

BT300.book 52 ページ２００９年６月１２日　金曜日　午後１２時１３分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic sc bt200 Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic sc bt200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info