Bedienungsanleitung Panasonic SC-BT235 (Seite 42 von 52) (Englisch)

533274

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

VQT2M13

Video is not output.

≥ Set the “High Clarity Sound” in the playback menu to “Off” to

use the VIDEO OUT terminal. (> 35)

Video is not output in high definition.

≥ Confirm that “HDMI Resolution” in the Setup menu are set

properly. (> 37)

No subtitles.

≥ When progressive output is on, closed captions cannot be

displayed.

The subtitles overlap closed captions recorded on discs.

≥ Turn off the subtitles or turn off the closed caption setting on

the TV. (> 34)

A black band is displayed around the edge of the screen.

The aspect ratio of the screen is abnormal.

≥ Confirm the “TV Aspect” is set properly. (> 37)

≥ Adjust the aspect setting on the television.

(Adjustment using “Screen Aspect” (> 26) on the unit is also

possible.)

No sound.

Low volume.

Distorted sound.

Cannot hear the desired audio type.

≥ Check connections to speakers and other equipment. (> 10,

11,13s18)

≥ Ensure the speaker settings for your speakers are correct.

(> 39)

≥

To output audio from a device connected with an HDMI cable,

set “HDMI Audio Output” to “On” in the Setup menu. (

37)

≥When “BD-Video Secondary Audio” is set to “On”, Dolby

TrueHD, Dolby Digital Plus, DTS-HD Master Audio and

DTS-HD High Resolution Audio are output as Dolby Digital or

DTS Digital Surround.

≥ Re-master will not work when the bitstream signal is output

from the HDMI AV OUT terminal. (> 35)

≥ Depending on the connected equipment, the sound may be

distorted if this unit is connected with an HDMI cable.

≥ The multi-channel audio from a device connected to the TV

is not output in it’s original multi-channel form.

jIf the device has an optical audio output terminal, connect

the device to this unit’s “OPTICAL 2” terminal. (> 15, 30)

No surround sound.

≥ Press [SURROUND] to select a surround effect. (> 24)

≥ [BT730] Ensure that the surround selector switch is set in the

center position. Then, turn the wireless system off and then

back on.

≥ [BT730] [BT330] [BT230] (When using the 7.1ch speaker

system)

Audio is not available from the surround back speakers even

though Dolby Pro Logic II turns on.

Cannot switch audio.

≥ When audio is output from the HDMI AV OUT terminal, set

“Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” to

“PCM”. (> 36)

No sound from the TV.

≥ Press [EXT-IN] to select the corresponding source. (> 23)

≥ The ARC (Audio Return Channel) function is not available.

Instead, use an optical digital audio cable or an audio cable

to have the TV sound. (> 14, 15)

≥ If the TV is not ARC compatible and only the HDMI

connection is used, an extra audio connection is necessary

(> 14, 15).

Cannot charge or operate.

≥ Check that the iPod/iPhone is connected firmly. (> 32)

≥ The battery of the iPod/iPhone is depleted. Charge the iPod/

iPhone, and then operate again.

Cannot display iPod/iPhone videos/photos on the TV.

≥ Make sure that TV is connected to the VIDEO OUT terminal

on this unit. (> 14)

≥ Operate the iPod/iPhone menu to make the appropriate

video/photo output settings for your TV. (Refer to operating

instructions for your iPod/iPhone.)

The TV input channel unintentionally changes to HDMI

input.

≥ When the main unit is connected with an “HDAVI Control”

compatible TV and VIDEO IN is selected for iPod/iPhone

video or photo playback, the TV input channel will

automatically change to the HDMI input channel when

[START] is pressed.

jRe-select the TV’s VIDEO IN input channel.

Distorted sound or noise is heard.

≥ Adjust the position of the antenna.

≥ Use an outdoor antenna. (> 16)

A beat sound is heard.

≥ Try to keep a certain amount of distance between the

antenna and the TV.

No power.

≥ Ensure the AC power supply cord of the wireless system is

connected properly.

The wireless link indicator (e.g., “ [W] ”) is flashing.

≥ There is no link between the main unit and the wireless

system. Turn the wireless system off and then back on.

Alternatively, turn the wireless system off, disconnect the AC

power supply cord and then reconnect it.

The wireless link indicator (e.g., “ [W] ”) does not light.

≥ Check that the main unit is turned on, and the wireless

system is turned on.

≥ Ensure that the digital transmitter is fully inserted into the slot

of the main unit. (> 16)

The wireless link indicator keeps flashing between red and

green.

≥ There is a power supply problem. Consult the dealer.

Sound

iPod/iPhone operation

Radio

[BT730] Wireless system

(SH-FX71)

SC-BT230_330_730P_PC_VQT2M13_eng.book 42 ページ２０１０年３月１６日　火曜日　午後５時５７分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-BT235 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info