Bedienungsanleitung Panasonic SC-BT270 (Seite 20 von 52) (Englisch)

533957

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

VQT3D27

The configuration of your network is about to begin. If you

failed to make the settings, refer to page 21

Select “Wired” and press [OK].

Follow the on-screen instructions to make your connection

settings.

≥ When you experience problems ( 21)

Preparation

≥ Obtain your network name ( 21, SSID).

≥ If your wireless connection is encrypted please be sure

that you know your encryption key.

1 Select “Wireless” and press [OK].

2 Select “Search for wireless network” or

“WPS (PUSH button method)” and press

[OK] then follow the on-screen instructions

and make the settings.

∫ “WPS (PUSH button method)”

If you are using a Wireless router that supports WPS (Wi-Fi

Protected Setup), you can easily perform the settings.

∫ “Search for wireless network”

The available wireless networks will be displayed.

1 Select your network name and press [OK].

≥ If your network name is not displayed search again by

pressing the [R] button on the remote control. Stealth

SSID will not be displayed, in this case enter manually.

When your wireless network is encrypted

2 Press [OK] to select “Encryption Key”.

3 Enter your encryption key.

To enter SSID manually

If your SSID is not displayed in step 1, follow these steps.

1 To display SSID input screen :

Press [HOME]  select “Others”  [OK]  [OK] (“Setup”)

 select “Network”  [OK]  select “Network Settings” 

[OK]  select “Wireless Settings”  [OK]  select

“Connection Setting” [OK]  select “Manual setting” 

[OK]

2 Press [OK] to select “SSID” and enter your SSID.

≥ If your wireless network is encrypted, go to step 2.

Network Easy Setting

Wired connection

Wireless connection

RETURN

Network Easy Setting

Wired

Wireless

Select a connection mode.

Current setting : Wired

LAN cable connection:

Connect a LAN cable to the unit and select "Wired."

Wireless LAN connection:

Select "Wireless."

Wireless Settings

Select a connection method.

Please refer to the operating instructions of your wireless

access point about connection methods.

Search for wireless network

WPS (PUSH button method)

RETURN

Search again

SUB

Wireless Settings

Reception

Select a wireless network for connection.

Network name (SSID)

XXXXXXXXXX

RGBY

Wireless Settings

Enter the encryption key of the wireless network.

Encryption Key

Set

Encryption Key

Space

1234567890

ABC

DEF

abc

def

ghi

jkl

+-*

#$&

<>@

mno

[]_

pqrs

()

tuv

{}

\ I

wxyz

“’:;

JKL

MNO

PQRS

TUV

WXYZ

0 - 9

GHI

Finish

Delete

RETURN

Wireless Settings

Enter your network name (SSID) to connect.

SSID

Set

SC-BTT770_370_270P_eng.book 20 ページ２０１０年１２月１６日　木曜日　午後９時５１分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-BT270 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-BT270

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info