Bedienungsanleitung Panasonic SC-BT300 (Seite 29 von 60) (Englisch)

602096

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

RQT9508

If you connect this unit to a TV that has “HDAVI Control 2” or later with

an HDMI cable, you can operate this unit using buttons on the TV

remote control.

The buttons that you can use for this unit vary, depending on the TV.

For details, refer to the operating instructions of the TV.

Use the remote control supplied with this unit if you cannot operate this

unit using buttons on the TV remote control.

≥The operation of this unit may be interrupted when you press

incompatible buttons on the TV remote control.

∫ Using the Control Panel

You can operate the playback with the indicated

controls.

∫ When you want to leave the TV on and set only this unit to standby mode

Press [Í] on this unit’s remote control and set to standby mode.

∫ When not using “HDAVI Control”

Set “VIERA Link” in the Setup menu to “Off”. (> 39)

Automatic input switching

When the following operations are performed, the TV will

automatically switch the input channel and display the

corresponding action.

–When play starts on the unit

–When an action that uses the display screen is performed

(e.g., Direct Navigator screen)

≥When you switch the TV input to TV tuner mode, this unit will

automatically switch to “AUX”*

, “D-IN 1” (DIGITAL IN 1)*

or “D-IN

2” (DIGITAL IN 2)*

≥This function does not work when the iPod selector (SIMPLE

mode) or iPod Video menu (EXTENDED mode) is chosen. (> 31)

≥When [1PLAY] is pressed, the playback image is not

immediately displayed on the screen and it may not be

possible to watch the contents from where playback

started.

In this case, press [SKIP:] or [SEARCH6] to go back

to where playback started.

Automatic lip-sync function

(for HDAVI Control 3 or later)

Delay between audio and video is automatically adjusted, enabling

you to enjoy smooth audio for the picture. (> 39, Time Delay)

≥This function works only when “BD/DVD”, “SD”, “AUX”*

, “D-IN 1”

(DIGITAL IN 1)*

or “D-IN 2” (DIGITAL IN 2)*

is selected as the

source on this unit.

Power off link

All connected equipment compatible with “HDAVI Control”, including

this unit, automatically turns off when you switch the TV off.

≥This unit automatically turns off even during playback or any other

operation.

To continue audio playback even when the TV is turned off,

select “Video” in “Power Off Link”. (> 39)

∫ Auto power stand-by

Auto power stand-by responsibly manages your power

consumption.

This function is available with a TV that supports “HDAVI Control 4”.

≥If connected with a TV (VIERA) with the “Auto power stand-by”

setting activated on the TV, when switching the TV input, the unit

will be automatically turned to standby. For details please read the

operating instructions of the TV.

–When “Speaker control” is set to “Home theater”, the main unit

will not automatically turn to standby.

One touch play

You can turn on this unit and the TV, and start play with a single

press of a button.

While the unit and the TV are in standby mode;

Press [1PLAY].

≥This unit’s speakers will automatically be activated. (> 28)

≥When [1PLAY] is pressed, the playback image is not

immediately displayed on the screen and it may not be

possible to watch the contents from where playback

started.

In this case, press [SKIP:] or [SEARCH6] to go back

to where playback started.

*1 “AUX” or “D-IN 1” works depending on the “TV AUDIO” setting.

(B 28, Setting the TV audio for VIERA Link “HDAVI Control”)

*2 “D-IN 2” works depending on the “CABLE/SAT AUDIO” setting.

(B 28, Setting the TV audio for VIERA Link “HDAVI Control”)

NOTE

Easy control only with VIERA remote

control

Using the START menu to operate this unit

By using the TV remote control, you can play media using the

START menu.

1 Press the button for VIERA Link

on the TV remote control.

2 Select the home theater.

≥The START menu is displayed

3 Select the desired items on the

START menu (> 16).

Using the sub menu to operate this unit

By using the TV remote control, you can play discs using the

“Control Panel” and display the Top Menu (for BD-Video and

DVD-Video) or Pop-up Menu (for BD-Video).

≥

This works only during “BD/DVD” or “SD” playback and resume modes.

1 Press [SUB MENU].

≥

You cannot use the sub menu while the Top

Menu for BD-Video or DVD-Video is displayed.

≥This can also be displayed by using the

VIERA menu screen.

2 Select an item, then press [OK].

Control Panel

Control Panel is displayed. Follow the

indications on the screen. (

below

)

Screen Aspect (> 21)

Top Menu [BD-V] [AVCHD] [DVD-V] Top menu is displayed.

Menu [DVD-V] Menu is displayed.

Pop-up Menu [BD-V] Pop-up menu is displayed.

Rotate Right [JPEG] Rotate the still picture.

Rotate Left [JPEG]

Zoom in [JPEG] Enlarge or shrink the still picture.

Zoom out [JPEG]

≥Depending on the menu, some button operations cannot

be performed from the TV’s remote control.

≥You cannot input numbers with the numbered buttons on

the TV’s remote control ([0] to [9]). Use this unit’s remote

control to select the playlist etc.

e.g., [BD-V]

RETURN

Other Functions

Playback DISC

Top Menu

Home theater START

BD-Video

Input Select

Sound(Equalizer)

Network

RETURN

SUB

Control Panel

Screen Aspect

Top Menu

Pop-up Menu

e.g., [BD-V]

e.g.

NOTE

BT300.book 29 ページ２００９年６月１２日　金曜日　午後１２時１３分

Panasonic SC-BT300 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info