Bedienungsanleitung Panasonic SC-BT300 (Seite 33 von 60) (Englisch)

602096

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

RQT9508

Network settings

These settings are used if you will connect this unit to the Internet.

≥The connection to the Internet may take time or the Internet may not be connected depending on the connection environment. (> 40)

It is required that you use a broadband connection.

Preparation

≥Connect to a broadband network. (> 14)

Testing of “IP Address/DNS Settings”

Always test the connection when a LAN cable is connected.

1 Press [BD/SD] to select “BD/DVD” or “SD”.

2 Press [SETUP].

3 Press [3, 4] to select “Network” and press

[OK].

4 Press [3, 4] to select “IP Address/DNS

Settings” and press [OK].

5 Press [3, 4] to select “Connection Test” and

press [OK].

“Testing...”:The test is in progress.

“Pass”: The connection is completed.

Press [RETURN] to exit.

“Fail”: Please check the connection and settings.

≥Perform the “Connection Test” also when any change was

made to the “IP Address/DNS Settings”.

≥If the connection test fails, it may be necessary to set the MAC

address of this unit at the router side. The MAC address can be

displayed by pressing [SETUP] and selecting “Network”.

NRUTER

IP Address/DNS Settings

Connection Test

OnOn

IP Address Auto Configuration ( DHCP )

DNS Auto Configuration ( DHCP )

IP Address

Subnet Mask

Default Gateway

Primary DNS

Secondary DNS

Auto Detect Connection Speed

Connection Speed Setting

NOTE

RETURN

Network

IP Address/DNS Settings

Proxy Server Settings

Network Service

MAC Address: xx-xx-xx-xx-xx-xx

Setting the IP address

In most cases, default settings can normally be used without

making any changes.

Set the IP address only when the router has no DHCP server

functions or when the router’s DHCP server function is

disabled.

After performing steps 1 to 4 (D left)

5 Press [3, 4] to select “IP Address Auto

Configuration ( DHCP )” and press [2, 1] to

select “Off”.

6 Press [3, 4] to select “IP Address”, “Subnet

Mask” or “Default Gateway” and press [OK].

7 Enter numbers with the numbered buttons and

press [OK].

≥After checking the specifications for your broadband router,

enter each number.

If the number is unknown, then check the number of other

devices such as personal computers connected via a LAN

cable. Assign a different number from those of other devices

for the “IP Address” and the same number for others.

≥If a wrong number is entered, then press [CANCEL].

8 Press [2, 1] to select “Yes” and press [OK].

≥The numeric input range is between 0 and 255.

Setting the DNS-IP

In most cases, default settings can normally be used without

making any changes.

When setting an assigned DNS server from your Internet

service provider, perform the following settings.

After performing steps 1 to 4 (D left)

5 Press [3, 4] to select “DNS Auto

Configuration ( DHCP )” and press [2, 1] to

select “Off”.

6 Press [3, 4] to select “Primary DNS” or

“Secondary DNS”and press [OK].

7 Enter numbers with the numbered buttons and

press [OK].

≥Follow the instructions given by your Internet service provider

and enter the numbers.

If the number is unknown, then check the number of other

devices such as personal computers connected via a LAN

cable and assign the same number.

≥If a wrong number is entered, then press [CANCEL].

8 Press [2, 1] to select “Yes” and press [OK].

≥The numeric input range is between 0 and 255.

NOTE

192

Primary DNS

Please input Primary DNS and press

[OK]. Press [CANCEL] to delete the selected

character. To clear this setting, delete all

characters and press [OK].

Number

NOTE

Advanced operations

BT300.book 33 ページ２００９年６月１２日　金曜日　午後１２時１３分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-BT300 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info