Bedienungsanleitung Panasonic SC-BT300 (Seite 38 von 60) (Englisch)

602096

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

RQT9508

Changing the unit’s settings

To select these settings, perform steps 1 to 5 (> 37)

“Audio”

Dynamic Range Compression [BD-V] [AVCHD] [DVD-V]

(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)

Change the dynamic range (> 54) for late night viewing.

≥On ≥Off

≥Auto: Effective only when Dolby TrueHD is played.

Digital Audio Output

≥Press [OK] to show the following settings.

Dolby D/Dolby D +/

Dolby TrueHD

Select whether Dolby Digital, Dolby

Digital Plus, Dolby TrueHD, DTS Digital

Surround, DTS-HD High Resolution

Audio or DTS-HD Master Audio is

output in “Bitstream” or “PCM” format.

≥Not making the proper settings

may result in noise.

≥

If the unit is connected with the

HDMI AV OUT terminal, the

specifications of the connected

equipment take preference over

this unit and audio selected in these

items may not be output (e.g., when

a TV is connected, the HDMI audio

output of this unit is limited to

down-mixed 2ch).

≥Bitstream: Select “Bitstream” when the connected equipment can

decode the respective audio format.

–Connect equipment supporting HDMI (High Bit rate

Audio) and use a High Speed HDMI Cable in order to

output high bit rate audio such as Dolby Digital Plus,

Dolby TrueHD, DTS-HD High Resolution Audio or

DTS-HD Master Audio.

≥PCM: Select “PCM” when the connected equipment cannot

decode the respective audio format.

Refer to the operating instructions for connected devices to verify whether

or not they can decode each of the audio formats.

DTS/DTS-HD

BD-Video Secondary Audio [BD-V]

Turn on/off the clicking sound on the menu and audio with

secondary video in picture-in-picture mode. (> 22)

≥

On: The primary audio and secondary audio are mixed and

output. The sampling frequency is converted to 48 kHz.

≥Off: The clicking sound on the menu and secondary audio

are not output.

PCM Down Conversion

Select how to output audio with a sampling frequency of 96 kHz

or more.

≥Signals are converted to 48 kHz despite the settings across in

the following cases:

–when the signals have a sampling frequency of over 192 kHz

– when the disc has copy protection

– when “BD-Video Secondary Audio” is set to “On”

≥On: Signals are converted to 48 kHz. (Choose when the

connected equipment cannot process signals with

sampling frequency of 96 kHz.)

≥Off

: Signals are output as 96 kHz. (Choose when the

connected equipment can process signals with

sampling frequency of 96 kHz.)

Downmix

Switch the downmix system for playing back multi-channel

surround sound.

≥

When “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” is set

to “Bitstream”, there are no downmix effects for the outputted audio.

≥The audio will be outputted in “Stereo” in the following cases.

– AVCHD playback

– Playback of clicking sound on the menu and audio with

secondary video in picture-in-picture mode

≥Stereo

: When connected to equipment that does not support

the virtual surround function.

≥Surround encoded:

When connected to equipment that support the

conversion from 2 channels to multi channel surround.

High Clarity Sound

When the analog video terminal is not being used, the electrical

current that flows through the analog video circuit can be

stopped. This prevents adverse effects on the audio signals and

produces clearer sound.

≥This works only when “BD/DVD” or “SD” is selected as the

source.

≥Set to “Enable” and then set “High Clarity Sound” in the

on-screen menu to “On”. (> 36)

≥Use this when outputting image via HDMI AV OUT terminal.

Analog image will not be output via COMPONENT VIDEO OUT

terminal or VIDEO OUT terminal.

≥Enable ≥Disable

Speaker Refer to page 41

“Display”

Status Messages

Choose whether to show status messages automatically.

≥Automatic ≥Off

On-screen Language

Choose the language for these menus and on-screen messages.

≥English

≥Français ≥Español

Screen Saver Function

This is to prevent burn-in on the screen.

≥When this is set to “On”, the masked-off area on the screen

becomes gray.

[Only when connecting with an HDMI cable or a component

video cable and “HDMI Resolution” (> 39) is set to any other

mode than “480p”, or “Component Video Resolution” (> 39) is

set to “720p” or “1080i”]

≥On

If there is no operation for 5 minutes or more, the displayed screen

switches to the other states automatically.

–When the Direct Navigator or START menu is displayed, the display

returns to the screen saver mode.

–When CD or MP3 is played, the display returns to the screen saver

mode. (Playback continues.)

–When still pictures are shown (except for slideshow), the display returns

to the Direct Navigator screen.

≥Off:

FL Display

Changes the brightness of the unit’s display.

–The brightness of the volume indicator (> 6) is also changed.

≥Bright

≥Dim: The display is dimmed.

≥Auto: The display is dimmed, but brightens when you

perform some operations.

License Information about the software used by this unit is displayed.

Advanced operations

BT300.book 38 ページ２００９年６月１２日　金曜日　午後１２時１３分

Panasonic SC-BT300 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info