Bedienungsanleitung Panasonic SC-BT735 (Seite 20 von 52) (Englisch)

533435

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

VQT2Q52

Select “Wired” or “Wireless” and press [OK].

∫ “Wired” connection

Follow the on-screen instructions to make your connection

settings.

≥ When you experience problems (> right)

∫ “Wireless” connection

If you select “Wireless” and “Wireless LAN Adaptor is not

connected.” is displayed, check that the Wireless LAN Adaptor

is fully inserted. Alternatively, disconnect and reconnect it. If

there is still no change in the display, consult your dealer for

advice.

Select “WPS (PUSH button)” or “Search for

access point” and then follow the on-screen

instructions and make the settings.

WPS (PUSH button):

If your Wireless router (Access point)

supports WPS (PUSH button), you can

easily perform the settings by pressing

WPS button on it.

WPS (Wi-Fi Protected Setup) is a

standard that facilitates settings relating

to the connection and security of

wireless LAN devices.

1 Press WPS button or corresponding button of Wireless

router (Access point) until the lamp starts flashing.

≥ For details, refer to the operating instruction of Wireless

router (Access point).

2 Press [OK].

*1 Wi-Fi Protected Setup-compatible Wireless router (Access point) may

have the mark.

Search for access point:

Available Wireless routers (Access points) are searched and

listed. You can select the one to use from the list.

1 Press [3, 4] to select SSID*

of Wireless router (Access

point) you want to connect with. Then press [OPTION] to

show information of the selected router, make a note of the

authentication and encryption type.

≥ If you can not find the SSID*

, select “Search again”.

2 Press [RETURN] and then press [OK].

Then select an item on the following screen which

corresponds to the authentication type noted down in step

1 (> left).

Follow the on-screen instructions to make the settings.

≥ Input your encryption key code in “Encryption Key”

supplied with your Wireless router (Access point).

Access Point Connection Setting

Network Easy Setting

RETURN

Network Easy Setting (Connection Test)

Wired

Wireless

Select a connection mode.

Current setting : Wired

LAN cable connection:

Connect a LAN cable to the unit and select “Wired”.

Wireless LAN connection:

Connect the Wireless LAN Adaptor (DY-WL10) to the USB

port and select “Wireless”.

Access Point Connection Setting

Select a connection method for access to

Wireless LAN.

Please refer to the operating instructions of

the access point about connection methods.

WPS (PUSH button)

Search for access point

e.g.,

Access Point Connection Setting

Reception

Select an access point to connect with.

To search for access point again, please

select "Search again" below.

SSID

XXXXXXXXXX

Search again

SSID

Wireless type

Authentication type

Encryption type

:XXXXXXXXXXXXXXX

:802.11n/g/b (2.4GHz)

:WPA-PSK

:AES

When you experience

problems with settings

Display Check the following

A conflict with another

device occurred.

≥ Please wait a few moments,

and then try again.

A time out error occurred. ≥ Setting of the Wireless

router (Access point) for

MAC Address etc.

≥ The signal may be weak.

Using the USB extension

cable supplied with the

Wireless LAN Adaptor,

adjust the position of the

Wireless LAN Adaptor.

≥ The SSID*

and the

encryption key of the

Wireless router (Access

point).

≥ Please wait a few moments,

and then try again.

An authentication error or a

time out error occurred.

A device error occurred. ≥ Connection of Wireless LAN

Adaptor

If there is no improvement in

symptom, consult your

dealer.

Access Point Connection Setting

WPA2-PSK (AES/TKIP)

WPA-PSK (AES/TKIP)

Open/Shared Key (WEP)

Open system

Select authentication type.

Access Point Connection Setting

Failed to connect to the access point.

A conflict with other devices occurred.

Do you wish to setup Access Point

Connection Setting again ?

Yes

SCBT735_330_230EBEPEG_VQT2Q52-B.book 20 ページ２０１０年２月９日　火曜日　午前１０時５１分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-BT735 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-BT735

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info