Bedienungsanleitung Panasonic SC-BTT100 (Seite 42 von 48) (Englisch)

511764

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

VQT4R78

Distorted sound or noise is heard.

¾ Adjust the position of the antenna.

A beat sound is heard.

¾ Try to keep a certain amount of distance

between the antenna and the TV.

Noise is excessive.

¾ Change the audio to be output as monaural.

Press [AUDIO] to select “MONO”.

The sound becomes monaural.

≥ To cancel, press the button again or change

the frequency.

In normal circumstances, select “AUTO STEREO”.

I can’t connect to the network.

¾ Confirm the network connection and settings.

(> 14, 15, 34)

¾ There may be obstacles that prevent the unit

from detecting your home network. Bring the

unit and the wireless router closer to each

other.

¾ Check the operating instructions for each

device and connect accordingly.

When using wireless LAN connection, video

from the DLNA Certified media server is not

played back or video frames are dropped

during playback.

¾ Higher transfer rate router such as 802.11n

(2.4 GHz) wireless router may solve the

problem. If you use 802.11n (2.4 GHz)

wireless router, it is necessary to set the

encryption type to “AES”.

Simultaneous use with a microwave, cordless

telephone etc. at 2.4 GHz may result in

connection interruptions or other problems.

¾ On the “Wireless Settings” screen (> 34), the

continuous lighting of at least 4 “Reception”

indicators is the target for a stable connection.

If 3 or fewer indicators are lit or the

connection is being interrupted, change the

position or angle of your wireless router and

see if the connection state improves. If there

is no improvement, connect to a wired

network and perform the “Easy Network

Setting” (> 15) again.

Messages

The following messages or service numbers may

appear on the TV or unit’s display.

Cannot play.

¾ You inserted an incompatible disc.

Cannot play on this unit.

¾ You tried to play a non-compatible image.

¾ Confirm “SD” on the unit’s display is not

displayed and re-insert the card.

No disc inserted.

¾ The disc may be upside down.

$ This operation is not available.

¾ Some operations are unsupported by the unit.

(For example, reverse slow-motion, etc.)

IP address is not set.

¾ The “IP Address” in “IP Address / DNS

Settings” is “---. ---. ---. ---”. Set the “IP

Address”, “Subnet Mask”, and “Gateway

Address”. (Select the automatic address

acquisition if necessary.)

The wireless access point currently has a low

network security setting. It is recommended to

change to a higher setting.

¾ Set a stronger network security level referring

to the wireless router operating instructions.

Radio

Network

On the television

SC-BTT100EB-VQT4R78_mst.book 42 ページ２０１２年１２月２１日　金曜日　午前９時３７分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-BTT100 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-BTT100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info