Bedienungsanleitung Panasonic SC-BTT196 (Seite 15 von 52) (Englisch)

533950

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Getting started

VQT3X51

STEP 5: Settings

After connecting your new home theater for the

first time and pressing [Í], a screen for the basic

settings will appear.

Preparation

Turn on the television and select the

appropriate video input on the television.

1 Press [Í].

Setup screen appears.

2 Follow the on-screen instructions and

apply the settings.



≥ You can perform this setup anytime by selecting “Easy

Setting” in the Setup menu. (> 35)

≥ If this unit is connected to a Panasonic TV (VIERA)

supporting HDAVI Control 2 or later via an HDMI cable,

then setting information on the TV such as “On-screen

Language” is acquired by this unit.

After completing “Easy Setting”, you can perform

“Easy Network Setting”.

Select “Wired” and press [OK].

Follow the on-screen instructions to apply your

connection settings.

Preparation

≥ Obtain your network name (> 16, SSID).

≥ If your wireless connection is encrypted,

please be sure that you know your

encryption key (password).

≥ If “Wireless LAN Adaptor is not connected.” is

displayed, check that the Wireless LAN Adaptor

is fully inserted. Alternatively, disconnect and

reconnect it. If there is still no change in the

display, consult your dealer for advice.

1 Select “Wireless” and press [OK].

2 Select “Search for wireless network” or

“WPS (PUSH button method)” and press

[OK], then follow the on-screen

instructions and apply the settings.

∫ “WPS (PUSH button method)”

If you are using a wireless router that supports

WPS (Wi-Fi Protected Setup

), you can easily

perform the settings.

∫ “Search for wireless network”

The available wireless networks will be displayed.

1 Select your network name and press [OK].

≥ If your network name is not displayed,

search again by pressing the [R] button on

the remote control. Stealth SSID will not be

displayed, in this case enter manually.

When your wireless network is encrypted

2 Press [OK] to select “Encryption Key”.

Easy Setting

Easy Network Setting

Wired connection

Wireless connection

Easy Network Setting

Wired

Wireless

Select a connection mode.

Current setting : Wired

RETURN

LAN cable connection:

Connect a LAN cable to the unit and select "Wired."

Wireless LAN connection:

Connect the Wireless LAN Adaptor (DY-WL5) to the USB

port and select "Wireless."

Wireless Settings

Select a connection method.

Please refer to the operating instructions of your wireless

access point about connection methods.

Search for wireless network

WPS (PUSH button method)

Search again

Wireless Settings

Reception

Select a wireless network for connection.

Network name (SSID)

XXXXXXXXXX

RGBY

RETURN

OPTION

Wireless Settings

Enter the encryption key (password) of the wireless network.

Encryption Key

Set

SC-BTT190P_eng.book 15 ページ２０１２年２月２０日　月曜日　午後５時５分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-BTT196 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info