Bedienungsanleitung Panasonic SC-BTT362 (Seite 21 von 52) (Englisch)

452164

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Getting started

VQT3M52

Network Easy Setting (Home Network Connection Check)

Network Easy Setting (Internet Connection Test)



≥ Refer to the operating instructions of the hub or router.

≥ You can perform this setup anytime by selecting “Network Easy Setting” in

the Setup menu. (> 42)

≥ You can redo these settings individually using “Network Settings”. (> 42)

[BTT362]

≥ Do not use this unit to connect to any wireless network for which you do not

have usage rights.

During automatic searches in a wireless network environment, wireless

networks (SSID) for which you do not have usage rights may be

displayed; however, using these networks may be regarded as illegal

access.

≥ After performing network settings on this unit, the settings (encryption level,

etc.) of the Wireless router might change.

When you have trouble getting online on your PC, perform the network

settings on your PC in accordance with the settings of Wireless router.

≥ Please be aware that connecting to a network without encryption may

result in the content of the communication being illegitimately viewed by a

third party, or the leaking of data such as personal or secret information.

Display

Check the

following

1. LAN cable connection or

Wireless Settings

:Fail

≥ Connection of

the LAN

cables (> 17)

2. IP address setting :Fail

3. Connection to gateway :Fail

1. LAN cable connection or

Wireless Settings

:Pass

≥ Connection

and settings of

the hub and

router

≥ Settings of “IP

Address /

DNS Settings”

(> 42)

2. IP address setting :Fail

3. Connection to gateway :Fail

1. LAN cable connection or

Wireless Settings

:Pass

2. IP address setting

:Pass or

Home

network

available

3. Connection to gateway :Fail

Network Easy Setting (Home Network Connection Check)

Yes No

Complete.

1. LAN cable connection

2. IP address setting

3. Connection to gateway

LAN cable is not connected.

Please check the connection.

Select “Yes” and press [OK] to check network

connection again.

Select “No” and press [OK]

to finish Network Easy Setting.

: Fail

Display Check the following

Cannot find the server.

(B019)

≥ “Primary DNS” and “Secondary

DNS” settings of “IP Address /

DNS Settings” (> 42)

Failed to connect to the

server.

(B020)

≥ The server may be busy or the

service may have been

suspended. Please wait a few

moments, and then try again.

≥ Settings of “Proxy Server

Settings” (> 43) and the router.

Network Easy Setting (Internet Connection Test)

Complete.

- Connection to the Internet : Fail(B019)

Failed the connection test.

Cannot find the server.(B019)

Please refer to the operating instructions for the cause

of the error and the countermeasure for it.

Press [OK].

SCBTT362_262_EB_VQT3M52_eng.book 21 ページ２０１１年１月２５日　火曜日　午後８時２２分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-BTT362 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-BTT362

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info